Bedienungsanleitung Soundcraft Si Impact (Seite 39 von 132) (Englisch)

611463

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

User Manual

5.4.2: USB PC DRIVER

INPUTS AND OUTPUTS > MADI-USB CARD > PC DRIVER

5.4.2: INPUTS & OUTPUTS > ViSi CONNECT > MADI-USB

Before you install the PC drivers, insert the MADI-USB Combo

Card into the console, connect the PC to the MADI-USB Combo

card and boot the console. Once the drivers are installed, short-

cuts for the control panel are available on the desktop or under

all programs, Harman Pro, Soundcraft, Multichannel USB Audio.

When the card is connected to the computer, task-bar icons will

indicate a device has been detected and clicking the icon will

open the appropriate control panel. When the drivers are installed

onto your PC, you will need to restart your machine for the install process to be complete.

The Soundcraft Audio Driver settings can be found in the Soundcraft USB Control Panel. Within this menu,

there are options to adjust the streaming mode of the MADI-USB Combo Card and the buffer size from 64

samples up to 8192 samples.

Recommended buffer size will vary depending on application,

however higher buffer sizes should be used when monitoring

from the DAW is not necessary. For most live recording

applications, a standard buffer size of 1024 samples is enough to

ensure reliable operation and clean audio.

The streaming mode settings modify the behaviour of the USB

driver for maximum optimisation when set in conjunction with the

buffer size setting. The buffer size modies the amount of audio

data that is stored before being released into the application. A

large buffer size results in higher latency to your DAW. A small buffer size reduces the latency to your DAW

but can cause audio glitches and errors.

To adjust the buffer size of the MADI-USB Combo card, both the streaming mode and the buffer size

settings need to be set correctly corresponding to one another.

For example, by setting the streaming mode to ‘Reliable’ and then the buffer size to 1024 samples, the

system will then be running at 1024 samples and the audio will be clean. For lower buffer sizes, the

streaming mode should be set to ‘Low Latency’ and the buffer size to 128 samples.

A mismatch between Streaming mode and buffer size could cause artefacts in the audio and could corrupt

the audio recording. A mismatched buffer setting such as setting the streaming mode to ‘Reliable’ and the

buffer size to 64 samples would result in distorted audio in your recording.

To avoid artefacts and to produce a reliable recording you should select the appropriate buffer size for the

streaming mode. When a mismatch occurs, a dialogue will appear at the bottom of the control panel menu

with instructions of where to go from the current setting to make a compatible setup.

To use the MADI-USB Combo Card on PCs additional drivers are necessary. Soundcraft’s

MADI-USB Combo card audio drivers can be found on the Soundcraft website (www.soundcraft.

com). The install package includes WDM and ASIO drivers for low-latency operation with a control

panel to congure driver settings for best performance. You do not need additional drivers for Mac.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundcraft Si Impact Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info