611463
41
Zoom out
Zoom in
Vorherige Seite
1/132
Nächste Seite
User Manual
6.1: INPUT CHANNELS
CHANNELS & BUSSES > INPUT CHANNELS
6.1: CHANNELS & BUSSES > INPUT CHANNELS
Input channels receive either external input from instruments, microphones, and so on, or they receive
input from the internal Lexicon FX units (FX Return - Stereo Input Channels 1-4).
Input channels can be mono (64 available: CH 01 - CH 64), stereo (4 available: ST 1 - ST 4 - FX Retunrs by default),
or mono-linked (assigned in odd/even stereo pairs of mono Input Channels), and can be patched to any microphone,
line, or digital inputs. Mono inputs do not have a FaderGlow colour. Mono-linked channels use FaderGlow white, and
Stereo FX returns from the internal FX units use FaderGlow cyan. If patched externally, stereo input channels use
FaderGlow pink
Input channels can contribute to any or all of the MIX 1-14 Mix busses (which feed the Mix Bus Master channels), the
Main L&R and Mono/Centre mix busses, or to the FX send busses - which get routed to the internal Lexicon FX. There
are three ‘taps’ for these bus contributions - Pre Dyn (Pre Dynamics), Post EQ, and Post Fader.
The levels of these contributions are accessed via the tOTEM buttons.
Please note, Input Channels can not contribute to the Matrix (MTX) busses, so the MTX FADER FOLLOW buttons are
not applicable for Control Channels assigned to Input Channels.
There are various input-specic options, found via the Touch Screen Main Menu INPUTS button. These offer
channel naming, linking, Pre/Post routing options for Mix busses and direct outputs, and physical input and Direct
Output patching. See section 6.1.1.
NOTE: For LCR Panning, LCR Panning Mode must be set in the INPUTS & VCA Menu. The Mono output patch is the
Centre output patch, and Mono routing must be enabled in the ACS (Assignable Channel Strip) OUTPUT section with
the MONO button (can be done in Interrogate mode for speed).
41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Soundcraft Si Impact wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info