Bedienungsanleitung Soundmaster MCD-9700 (Seite 7 von 11) (Englisch)

562125

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

7. USING THE AM/FM RADIO

Press “INPUT” button to select AM/FM.

AM Frequency 522 to 1620KHz, FM Frequency 87.5 to 108MHz.

The auto tune function provided will automatically scan for stations and stop on a station with a

strong signal level.

The audio function allow listening in stereo and mono, there are 2 options ‘auto’ and ‘mono’. If

mono is selected any radio station broadcasting in stereo will only be heard in mono sound. This

can be useful because when listening to a weak station in stereo selecting mono can often

improve the quality of reception.

Auto tune function

Note: Ensure the telescopic aerial is fully extended.

To start the auto tune function to scan for the next radio station:

1). If disc play mode is currently selected Press the INPUT button,

the LCD will display the welcome screen:

2). Press the BAND button until the LCD display shows

‘Switching to FM’. The radio will then tune to the station that was previously selected.

3). Press the AUTO button, the LCD will show frequencies changing until a station is

found, the station is then played.

Manual tune

1). Whilst listening to a station press the buttons TUNING ‘-’ or ‘+ ’ to tune up or down.

The LCD display will show the frequency changing.

Selecting audio function

To select audio function ‘auto’ (stereo and mono reception) or ‘mono’(mono only reception):

1). Whilst listening to a station pressing the ENTER/ST/MO button will select ‘auto’ or ‘mono’ mode.

The LCD display shows ‘Audio mode: Mono’ or ‘Audio mode: auto’.

Store and recall a preset station

This unit has 30 presets for FM and 20 presets for AM. Please use the following

steps to store favorite stations into the preset memories:

a. Press the BAND button to select the required AM/FM

b. Press “ AUTO” button or “TUNING”“-”/“+”button to turning stations.

C. Press “MEM” button 3 sec，When have CH-XX ’

show on display and bicker, that press the number key of remote,

to set the stations. And press this key every time will

turn to the preset stations

Select each of the tracks you wish to play using the numeric buttons. If you

require to programmed a track above 10, use the 10+ button. Each press of this

button will increase the selection by ten. For example:

To programmed track 12, press the 10+ button once and then press the 2 button.

To programmed track 24, press the 10+ button twice and then press the 4 button.

Displaying data information

To display data information:

1. Whilst listening to a station repeatedly press the DISPLAY button to select the data information

required, the display will show the data information in the bottom line of the LCD display.

Typical examples of data information screens:

Radio R4 FM

08 : 44 03 - 06 - 2005

Radio R4 FM

Current Affairs

Radio R4 FM

he Bank of Engla

Program type

Current time

and date

Scrolling text

information

xxxxx

Radio

CH-02 93.50MHz

Auto

(

Stereo

)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster MCD-9700 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Soundmaster MCD-9700

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info