Bedienungsanleitung Soundmaster MCD-9700 (Seite 9 von 11) (Englisch)

562125

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

Programmed track selection

You can set your CD Player to play a preset selection of tracks.

1. Press the

so the CD is not playing then press the PROG button. The LCD display will show 00

P- 00. The first two digits 00 are where the selected track number is entered, P-00 Is the program

counter which will increment after a track is entered.

2. Press either

or buttons until the required track number is shown. The LCD displays the

selected track and the program counter which has incremented to P-01.

3. Press the PROG button again, the LCD will now display 00 P-02 and is ready for another track to

be entered.

4. Repeat steps 2 and 3 above until all the tracks are stored.

5. To clear a program so the program counter is reset to 00 P-00 press the

button.

6. To play the programmed tracks press the

button.

7. When playing a program you can skip through the programmed selection using the

and

buttons.

8. After all the programmed tracks have been played, the CD player stops automatically and your

programmed selection is cleared.

Note: There can be up to a maximum of 20 tracks stored, the same track can be stored more than

once.

Repeat disc play

You can set your CD player to repeat a single track, the whole CD or your programmed selection

of tracks.

To repeat a single track during play mode:

1. Press either

or buttons to select the track you wish to repeat. The LCD display shows the

selected track and the track will play.

2. Press the REPEAT button until the LCD display shows ‘Repeat One track’ The selected track will

play continuously until you press the

button.

3. To cancel the repeat function and to continue playing the CD press the REPEAT button until the

LCD display shows ‘Repeat Off’.

To repeat a single track during stop mode:

1. Press either

or buttons to select the track you wish to repeat. The LCD display shows the

selected track.

2. Press the REPEAT button until the LCD display shows Repeat One track.

3. Press the

button to start repeat single play.

To repeat the entire CD during play mode:

1. Press the REPEAT button until the LCD display shows ‘Repeat All Track’. The entire disc will play

continuously until you press the

button.

2. To cancel the repeat function and to continue playing the CD press the REPEAT button until the

LCD display shows ‘Repeat Off’.

To repeat the entire CD during stop mode:

1. Press the REPEAT button until the LCD display shows ‘Repeat All Track’.

2. Press the

button to start repeat entire play.

To repeat a programmed selection:

Select your programmed tracks as described previously.

1. Whilst the programmed selection is playing press the REPEAT button until the LCD display shows

Repeat All. The programmed tracks will play continuously until you press the

button.

2. To cancel the repeat function and to continue playing the CD press the REPEAT button until the

LCD display shows ‘Repeat Off’.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster MCD-9700 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Soundmaster MCD-9700

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info