Bedienungsanleitung Soundmaster NR540 (Seite 16 von 87) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Schwedisch, Norwegisch)

733816

Zoom out

Zoom in

Vorherige Seite

1/87

Nächste Seite

4. Press “RECORD” button (10) again, the system will flashing with “ ” icon. Encoding is performing now.

5. After completing of recording, unit will stop playback automatically.

6. Press “ stop ” button (14) to interrupt the recording mode anytime.

7. For encode whole CD track, pls stay CD in stop mode then press “RECORD” button (10) three times until the display

flashing “ ”, then system will start to playback CD and encoding whole disc.

M_NR540 / English Instruction Manual

Remark:

- The recording speed is 1:1 and according to the actual plying time of the CD track

- The recording format is preset at – MP3 bit rate: 128 kbps, sampling rate: 44.1khz

- No song title will be recorded during encoding mode

- To interrupt the recording, press the “Stop” button (14) during record mode

If putting a MP3 disc instead of a CD-disc, the system will copy the files to the USB if press the “Record” button. The operation

procedures is same as CD encoding as stipulate on above, and the system will switch to copy mode only if MP3 file being read.

B) Phono/Cassette encoding

1) Set the function button to “Phono or Cassette” mode and then press the “Record” button (10) directly.

2) The LCD display will flashing “CHECK” a while then display “ ” & “ ” are flashing. Now the system is starting the

encoding mode.

3) Start playback at phono or cassette for the track which you want to record to USB

4) After finish of recoding, press the “Stop” button (14) until the LCD stop flashing and return to “Phono or Tape” mode.

C) Aux-in encoding

1) Connect the Aux-in jack with the device which you want to record

2) Set the function button to “Phono/Aux-in” mode and then press the “Record” button (10) directly.

3) The LCD display will flashing “CHECK” a while then display “ ” & “ ” are flashing. Now the system is starting the

encoding mode.

4) Start playback at phono or cassette for the track which you want to record to USB

5) After finish of recoding, press the “Stop” button (14) until the LCD stop flashing and return to “Phono or Tape” mode.

D) Tuner encoding

1) Set the function button to “AM/FM” mode and tune to desired station for encoding, press the Radio encode button (5), LCD

display will light up and appear “RADIO”. Then press the “Record” button (10) directly.

2) The LCD display will flashing “CHECK” a while then display “ ” & “ ” are flashing. Now the system is starting the

encoding mode.

3) After finish of recoding, press the “Stop” button (14) until the LCD stop flashing and return to “Tuner” mode.

E) Track separation (by remote handset)

You can divide the recording music from phono/Cassette/Tuner to USB track by trace during encoding. Every time when press the

“ ” (track separation) button once at remote handset during encoding from phono/tape/radio to USB, the system will generate a

new track and continuous the recording. The current text at LCD display will flashing one time, it mean the unit is creating a new

track successfully.

Removing of USB

To remove the USB, turn off the power or switch the function mode to either CD or tuner first. For USB port, unplug it by pulling out

the USB socket directly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster NR540 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info