Bedienungsanleitung Soundmaster SCD1900 (Seite 11 von 63) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch)

733869

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

SCD1900 / English Instruction Manual

Manual Tuning

You can use the manual tuning to tune to weak stations or your desired frequency.

1. During FM operation, repeatedly press the “Tune +” or “Tune –“ button until you read your

desired frequency or the reception is at its best.

2. The stereo icon will be displayed if a FM stereo station is received. To switch between

stereo and mono, press the ■ button.

Programming Preset Stations

You can program stations of your choice and store up to 20 stations into its memories.

1. First tune to your desired station, then press the “Program” button once and the display will

show “P-01” and flash, press the “Preset +” or “Preset –“ button to select the preset

number.

2. When your desired preset number appears on the display, press the “Program” button

again to confirm, the current station will be stored into your desired preset number.

3. Repeat the steps 1 and 2 to program more preset stations, storing a new station into a

preset location will erase the previous stored station in that location.

Recalling the Stored Preset Stations

To recall the stored preset stations, repeatedly press the “Preset +” or “Preset –“ button until

you see your desired preset number, the associated frequency will be displayed.

NOTE: Although this CD/MP3 player can read CD-R and CD-RW discs in addition to normal

CDs, the playability of CD-R and CD-RW discs may be affected by the type of software that was

used to create the discs, as well as the quality and condition of the blank media you are using,

100% playability cannot be guaranteed. This is not an indication of a problem with the player.

Playing the CD

1. To select CD mode, repeatedly press the “Mode” button until “CD” is displayed.

2. Open the CD door and load the disc with the printed label side facing up and close the CD

door. The display will finally show the total number of tracks. If a CD/MP3 disc is being

played, the display will show “MP3”.

3. Press the ▶II button to start playback from the beginning, and you can now press the ▶II

button to toggle select between the playback “PAUSE” and “PLAY” function.

4. To skip forward or back to other tracks during playback, press the ◀◀ or ▶▶ button.

5. To select other folders in the CD/MP3 disc, press the “Preset +” or “Preset –“ button.

6. To stop playback, press the ■ button.

Repeat and Random Play

During playback, you can press the “Repeat” button to select the repeat and random playback

function:

1. To repeat the same track, press “Repeat” button once, the display will show “Repeat One

icon”.

2. To repeat the entire disc, press the “Repeat” button again, the display will show “Repeat All

icon”.

3. If you are playing a MP3 disc, an additional “FOLDER” option will appear. This will repeat

the current folder.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster SCD1900 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info