Bedienungsanleitung Soundmaster SCD1900 (Seite 12 von 63) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch)

733869

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

SCD1900 / English Instruction Manual

4. To start random playback, repeatedly press the “Repeat” button until “RAND” appears in

the display.

5. To resume normal playback, repeatedly press the “Repeat” button until the “Repeat” or

“RAND” icon disappears in the display.

Program Play

You can use the program play feature to play up to 20 tracks on a disc in any desired order. You

may also program a particular track to play several times within a programmed sequence.

1. Load your disc as usual and wait until the display shows the total number of tracks on the

disc.

2. Ensue it is in CD stop mode, press the “Program” button once, the display will show “P 01”.

3. Press the ◀◀ or ▶▶ button to select the first track number to be programmed. When your

desired track number appears in the display, press the “Program” button to confirm and the

first track to play is programmed. The program memory number will advance to “P 02” and

ready for the next entry.

4. If a MP3 disc is being loaded, press the “Preset +” or “Preset –“ button to select folder.

5. Repeat the above steps to program other tracks, a maximum number of 20 tracks (99 for

MP3) can be programmed. When you have completed programming, press the ▶II button to

begin program play, playback will be started on the first track that you have programmed

and will continue until the last programmed track has played.

6. When the program play is completed, the player stops and it will remain in the program play

mode as long as the “Program Play icon” is displayed. Press the ▶II button will play the

programmed sequence again.

7. To erase the program, press the ■ button once in CD stop mode; and press the ■ button

twice during CD play, the “Program Play icon” will disappear in the display.

Repeat Program Play

You may use the program play and the repeat play features together to continuously repeat a

programmed playback. First program the desired playback sequence, then press the “Repeat”

button to select repeating the current track (Repeat One) or the entire programmed sequence

(Repeat All).

USB

1. To select USB mode, repeatedly press the “Mode” button until “USb” is displayed.

2. Insert your USB memory device into the USB port (located at the back of the unit), the

display will show the total track number and you can now start your USB/MP3 playback

operation.

3. To interrupt or start playback, press the ▶II button.

4. To skip forward or back to other tracks during playback, press the ◀◀ or ▶▶ button.

5. To select other folders, press the “Preset +” or “Preset –“ button.

6. To stop playback, press the ■ button.

Repeat, Random and Program Play is the same as in CD-Mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster SCD1900 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info