IMPORTANT:
Be sure that the battery is installed correctly. Wrong polarity may damage the unit
and void the warranty. For best performance and longer operating time, we
recommend the use of good quality alkaline battery.
AC POWER CONNECTION
Plug the AC power cord into a household outlet AC source.
SETTING THE CALENDAR AND TIME
1. In standby mode, press and hold the Time set button (5) for about 2 seconds
to enter the calendar/time set mode.
2. The year indicator will flash on the LED DISPLAY for up to 30 seconds
prompting for a new entry.
3. While the display is flashing, repeatedly tap the unit buttons (2), (3) to adjust
to the correct year. Press and hold the unit (2), (3) button faster scanning
backward or forward. Tap the unit button (5) to confirm.
4. Repeat steps #2 to #3 to adjust the month, day, time format, current hour and
finally current minute in the same way.
Notes:
The display sequence in calendar / time set mode will be as follows:
Year → Month → Date → 12/24 Hour Time Format → Real Time Hour →
Real Time Min → Normal Time
To check the year while current time is displayed, tap the unit button (2) once.
The LED DISPLAY will change to year display for 5 seconds and then revert to
current time automatically.
To check the date while current time is displayed, tap the unit button (2) twice.
The LED DISPLAY will change to date display for 5 seconds and then revert to
current time automatically.
Make sure the hour is set so that the PM indicator is displayed correctly for
afternoon/night times.
SWITCHING THE UNIT ON/OFF
Press the unit on/off button (1) to switch the unit on or off.
VOLUME ADJUST
Press the unit (6) and (7) button to set the desired volume level. The volume level
reading will appear in the LED DISPLAY.
