DIMMER CONTROL
In radio off mode, press the DIMMER button (4) allows you to set the brightness
of the LED display to high, low 2 levels.
1. The clock display with dimmer low is the default setting.
2. It will consume more power if you set the clock display with dimmer higher.
TOGGLE TEMPERATURE DISPLAY BETWEEN °C (CELSIUS) AND °F
(FAHRENHEIT)
1. Press the device to standby mode using the unit button (1).
2. Press the unit button (2) to display the temperature.
3. While the temperature is displayed, press the unit button (2) for about 3
seconds to switch between °C and °F.
RADIO TUNING
1. In standby mode, Press the unit on/off button (1) to turn the unit ‘On’.
2. The LED DISPLAY will show the radio frequency for about 5 seconds and
then revert to normal time display.
AUTOMATIC SEARCH FOR RADIO STATIONS
To automatically search for stations with strong signals, press and hold the main
unit button (2) and (3) until the frequency readout on the display begins to scan.
Release the button. The tuner will stop on the first strong station it finds.
MANUAL SEARCH FOR RADIO STATIONS
1. Tap the unit (2) and (3) button repeatedly to choose your desired radio
station.
2. Tap the unit (6) and (7) button to set the desired volume level. The volume
level reading will appear in the LED DISPLAY.
Notes:
- Use manual tuning to select weaker stations that might be skipped during
automatic tuning.
- If the automatic tuning does not stop on the exact frequency of the station, for
example, it stops on 88.9 MHz instead of 88.8 MHz, use the manual tuning
method to “fine tune” to the exact frequency of the desired station.
HINTS FOR BEST RECEPTION
To insure maximum FM tuner reception, unwrap and fully extend the EXTERNAL
FM WIRE ANTENNA for best FM radio reception.
