Bedienungsanleitung Soundmaster URD700 (Seite 8 von 10) (Englisch)

562265

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

ENGLISH

ENG 6

Setting the alarm

• You can set a time to wake up at which the device will come on either in the radio or CD mode. Or you can be

awakened by an alarm signal. You can save two wake-up times in total.

• Press the ALARM1 (15) or the ALARM2 (14) button. The time digits will blink in the display.

• Set the wake up time with the /MINUTE (12) and /HOUR (11) buttons and confirm it by pressing either the

ALARM1 or ALARM2 button.

• The LED indicator AL.1 (J) or AL.2 (I) will light up. If you have saved 2 wake up times, both LED indicators will

come on.

• Set the desired volume by turning the volume control (23) on the device.

• Set the FUNCTION switch (22) to CD, if you would like to be awakened by music from a CD. Make sure that

there is a CD in the CD compartment (1).

• Set the FUNCTION switch to AM or FM, if you would like to be awakened by the radio. Select the desired radio

station by means of the TUNING control (27).

• Set the FUNCTION switch to BUZZER/AUX IN in order to be awakened by an alarm signal.

• If the device is switched on by the wake up function, the particular LED indicator AL.1 or AL.2 will blink in the

display. To switch off the alarm, press on the relevant ALARM1 or ALARM2 button or press on the ON/ OFF

button (17).

• Delete the wake up time by pressing once on the ALARM1 or ALARM2 button. The LED indicator AL.1 or

AL.2 will go out.

Repeat alarm (SNOOZE)

• If the device is switched on by the wake up function, it can be switched off temporarily by means of the

SNOOZE button (2). The LED indicator SNOOZE (E) will come on.

• The device will be switched on again after approx. 5 minutes.

Programmed switch-off (SLEEP)

• To fall asleep with music, a time of 90, 60, 30 or 15 minutes can be set. After the time has elapsed, the device

will automatically switch off.

• Press the SLEEP button (4) several times to determine the switch-off time. The LED indicator SLEEP (H) will

come on in the display.

• To deactivate the sleep function, press the SLEEP button as often as it takes until the LED indicator SLEEP

goes out.

• Slide the FUNCTION switch (22) on the device to CD.

• Open the CD tray (1) by pressing on the OPEN/CLOSE CD tray lock (3). The lid of the CD tray will open

upwards. Never use force to open the CD tray.

• Remove the shipping safety lock, when you open the CD tray for the first time.

• Insert a CD into the tray, so that the printed side is facing upward. Press on a point in the cemtre of the CD until

it locks into place on the axis.

• Press the CD tray lid down to shut the CD tray. The CD will now be read.

• Before reopening the CD tray, always make sure that the CD is no longer rotating. Always press on the button

■ (13) first to end the rotation of the CD.

• To remove the CD, place one finger on the centre of the CD (the middle of the spindle) and another finger on

the edge of the disc. Pull the CD out carefully.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster URD700 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Soundmaster URD700

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info