Bedienungsanleitung Soundmaster URD700 (Seite 9 von 10) (Englisch)

562265

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

ENGLISH

ENG 7

Playing mode

• Switch the device into playback mode and insert an audio CD as as previously described.

• In the display (7), the total number of tracks on the CD will be shown for 2 seconds. The display will change to

indicate the time. Press the DISPLAY button (5) to display the total number of tracks again for 2 seconds.

• If the CD is being played, you can use the DISPLAY button to show the current played track number (approx.

2 seconds).

• Playback/pause: Press the button (10) to start and pause playback. If playback has been paused, the track

number will blink in the display (approx. 2 seconds).

• Stopping playback: Press the button (13) to stop playback. The total number of tracks on the CD will be

shown in the display (approx. 2 seconds).

• Next or previous track: Use the /MINUTE (12) and /HOUR (11) buttons to skip a track forward/ back. When

the button /MINUTE (12) is pressed once, the current track will be played from the beginning. When the button

is pressed twice, then the previous track will be played. When the /HOUR button (11) is pressed, the next track

will be played.

• Fast forwarding and rewinding: By holding down the /MINUTE (12) and /HOUR (11) buttons, you can fast

forward or rewind the current track. Once the desired place has been found, let go of the button to continue

playback.

Repeat function

• You can set this function while a track is being played back or when the device is in stop mode.

• Press the PLAY MODE button (8) once to continuously repeat the current track. The LED indicator REPEAT

(F) will blink in the display.

• Press the PLAY MODE button twice to continuously repeat the entire CD. The LED indicator REPEAT will

come on.

• Press the PLAY MODE button twice to switch off this function.

Random playback

• Press the PLAY MODE button (8) three times to play all tracks in random order. The LED indicator RANDOM

(B) will come on.

• Press the PLAY MODE button again to switch off this function.

Programming a playback list

• You can program the CD player to play a sequence of up to 20 tracks.

• Switch the device on with the ON/OFF button (17) and then switch the device into CD playback mode.

• Press the PROGRAM button (9) once to switch to programming mode. The number of the storage space,

P.01, will be shown briefly on the display. Then, the track numbers .00 and the LED indicator PROGRAM (G)

will blink in the display (7).

• Using the the /MINUTE (12) and /HOUR (11) buttons, select a track from the CD. Save your selection with the

PROGRAM button. The second storage space (P.02), will be opened and can be set as previously described.

• Continue to program further tracks as described above.

• Press the button (10) to play the programme. The LED indicator PROGRAM (G) will come on.

• After all programmed tracks have finished playback, the CD player will stop automatically.

• Press the button (13) to stop playing the programme. The playback list will remain in the device’s memory. You

can then play the same playback list again by pressing the PROGRAM button (9) and then the button (10).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundmaster URD700 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Soundmaster URD700

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info