Bedienungsanleitung Sparky BBK2 1500 (Seite 7 von 114) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

604126

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

Original instructions

5. SERVICE

a) Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

Diamond core drills safety

warnings

Wear ear protectors when operating the

machine. Exposure to noise can cause hearing

loss.

▪ Use the auxiliary handle supplied with the

machine. Loss of control can cause personal injury.

During operation provide eye protection

to prevent eyes from exposure to flying

particles. Wear goggles.

Take protective measures against inhalation

of dust. Some materials can contain toxic

ingredients. Wear a dust mask and work with

dust/chip extraction when connectable.

▪ Hold the power tool by insulated gripping

surfaces only, when performing an operation

where the cutting accessory may contact hidden

wiring or its own cord. Cutting accessory contacting

a “live” wire may make exposed metal parts of the

power tool “live” and could give the operator an

electric shock.

▪ Do not process materials containing asbestos.

Asbestos is considered carcinogenic.

WARNING: Before connecting a tool to a

power source be sure that the voltage supply is the

same as that specified on the nameplate of the tool.

▪ A power source with a voltage greater than that

specified for the tool can result in serious injury to the

user, as well as damage to the tool.

▪ If in doubt, do not plug in the tool.

▪ Using a power source with a voltage less than the

nameplate rating is harmful to the motor.

▪ Fully unwind cable drum extensions to avoid potential

overheating.

▪ When an extension cable is required, you must ensure

that it has the right ampere rating for your power tool

and it is in safe electrical condition.

WARNING: Always switch off and unplug

the power tool prior to any adjustment, servicing or

maintenance.

▪ While operating the machine, always hold it firmly

with both hands and provide for a secure stance. The

power tool is guided more securely with both hands.

▪ Always work standing on a stationary, secure and

level surface. Slippery or unstable surfaces like

ladders may lead to loss of balance or loss of control

of the tool.

▪ Be sure no one is below when using the tool in high

locations.

▪ Keep handles dry, clean, and free from oil and grease.

Greasy, oily handles are slippery causing loss of

control.

▪ Use non-skid safety footwear to avoid injuries

resulting from slipping on a smooth wet floor.

▪ Prior to operation use suitable detectors to determine

if utility lines are hidden in the work area or call the

local utility company for assistance. Contact of the

core bit with electric lines can lead to fire and electric

shock. Damaging a gas line can lead to explosion.

Penetrating a water line causes property damage or

may cause electric shock.

▪ Always keep the cord away from the working area

of the power tool. Never use the machine with a

damaged cable. Do not touch the damaged cable

and pull the mains plug when the cable is damaged

while operating. Damaged cables increase the risk of

electric shock.

▪ Prior to switching on the power tool ensure that the

core bit rotates freely.

▪ In case the core bit jams, switch the machine off

immediately.

▪ Do not touch the core bit or the machined surface

near the core bit during operation and immediately

after that; they may be extremely hot. You may get

serious burns.

▪ Keep work area clean. Blends of materials are

particularly dangerous. Dust from light alloys can burn

or explode.

▪ Rags, cloths, cord, string and the like should never be

left around the work area.

▪ Always switch the machine off before putting it down.

▪ The tool must be used only for its prescribed purpose.

Any use other than those mentioned in this Manual

will be considered a case of misuse. The user and not

the manufacturer shall be liable for any damage or

injury resulting from such cases of misuse.

▪ To use this tool properly, you must observe the safety

warnings, the general and operating instructions

found in this Manual. All persons who use and service

the machine have to be acquainted with this Manual

and must be informed about its potential hazards.

Children and frail people must not use this power tool.

Children should be supervised at all times if they are

in the area in which the tool is being used. It is also

imperative that you observe the accident prevention

regulations in force in your area. The same applies for

general rules of occupational health and safety.

▪ The manufacturer shall not be liable for any changes

made to the tool nor for any damage resulting from

such changes.

▪ Power tools must not be used outdoors in rainy

weather, or in moist environment (after rain) or in close

vicinity with easily flammable liquids and gases. The

working place should be well lit.

pages-BBK2[3]1500.indd 5 9.7.2014 г. 10:22:51 ч.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sparky BBK2 1500 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info