604126

Sparky BBK2 1500 Seite 8

8
Zoom out
Zoom in
Vorherige Seite
1/114
Nächste Seite
6
BBK2 1500 • BBK3 1500
EN
Specic safety instructions for operating with a drill
stand
For detailed information refer to the operating instruc-
tions for the drill stand.
▪ Hold the drill stand by insulated gripping surfac-
es only, when performing an operation where the
cutting accessory may contact hidden wiring or
its own cord. Cutting accessory contacting a “live”
wire may make exposed metal parts of the drill “live”
and could give the operator an electric shock.
▪ Assemble the drill stand properly before installing the
drill.
▪ Secure the drill stand on a firm flat surface or wall.
The drill stand must be absolutely immobile to ensure
smooth and secure operation of the drill.
▪ Fasten the drill securely and safely to the drill stand
before starting to operate it. Any displacement of the
drill in the stand may cause loss of control.
Specic instructions for wet drilling
▪ Never operate the machine without a switched on
PRCD.
▪ Never use water source with operating pressure
higher than the maximum pressure stated herewith
for coupling to the water feed system.
▪ Always check the integrity of the water feed system.
DO NOT USE THE POWER TOOL in case of leaks!
▪ Take care that the water coming out does not contact
the machine motor or bystanders.
▪ Take care the PRCD does not contact water.
Know your product
Before using the power tool, familiarize yourself with all
the operating features and safety requirements.
Use the tool and accessories only for the applications
intended. All other applications are expressly ruled out.
1. ON/OFF switch
2. Lock-on button (to be used ONLY when operating
with a drill stand)
3. Bubble level
4. Spindle
5. Handle
6. Speed selector switch
7. Auxiliary handle
8. Water feed system
9. Adapter
10. PRCD - portable residual current device
Operation
This power tool is supplied from single-phase alternating
current mains only. It is double insulated, but when
operated with PRCD the power tool features safety
class I according to EN 60745-1 and IEC 60745-1 and
MUST NOT be connected to sockets without protective
terminals. This power tool is radio suppressed in
compliance with EMC Directive 2004/108/EC.
This power tool is designed for dry and wet drilling with
diamond core bits in construction materials like concrete,
reinforced concrete, all kinds of masonry, asphalt, all
kind of oors, stone.
This power tool is designed for hand drilling or drilling on
a drill stand SP 60 (sold separately).
WARNING: Always connect this power tool to
a socket with protective ground. Connecting the power
tool to a socket without protective ground will cause
risks for your health and it is on your responsibility.
WARNING: Never use the power tool without
the PRCD delivered with the machine!
WARNING: Always test the PRCD proper
functioning before you start operation! In case the
PRCD does not function properly do not start operat-
ing the power tool; but contact the nearest authorised
service centre!
WARNING: Always check the integrity of the
water feed system. DO NOT USE THE POWER TOOL
in case of leaks!
WARNING: When connecting to the water
feed system never use a source with water pressure
greater than the maximum stated in the specifications
of this manual!
PRIOR TO INITIAL OPERATION
▪ Check the position of ON/OFF switch. The power
tool must be connected to the power supply socket
only when this switch is in OFF position. If the plug is
connected to a receptacle while the power switch is
in the ON position, the power tool will start operating
immediately upon checking the PRCD, which could
cause a serious accident.
▪ Make sure that the supply cord, PRCD and the plug
are in order. If the replacement of the supply cord
or PRCD is necessary, this has to be done by the
manufacturer or his agent in order to avoid a safety
hazard.
WARNING: Always switch off and unplug
the power tool prior to any adjustment, servicing or
maintenance or in case of mains drop-out.
▪ In case the work area is remote from the power
source, use as short as practicable extension cord
with proper cross-section..
▪ Check that the auxiliary handle is properly mounted
and reliably tightened.
CHECKING THE PRCD
▪ Make sure the ON/OFF switch (1) is in switched off
position.
pages-BBK2[3]1500.indd 6 9.7.2014 г. 10:22:51 ч.
… 8 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sparky BBK2 1500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info