Bedienungsanleitung Sparta D-rule M8Tb - 2021 (Seite 19 von 230) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Schwedisch)

779128

Zoom out

Zoom in

Vorherige Seite

1/230

Nächste Seite

English – 4

To activate the push assistance, briefly press the WALK

button on your on-board computer. After activation, press

the + button within 3s and keep it pressed. The eBike drive

is switched on.

Note: The push assistance cannot be activated at assistance

level OFF.

The push assistance is switched off as soon as one of the

following occurs:

– You release the +button;

– The wheels of the eBike are locked (e.g. by applying the

brakes or hitting an obstacle);

– The speed exceeds 6km/h.

The push assistance function is subject to local regulations;

the way it works may therefore differ from the description

above, or the function may even be deactivated completely.

Powering external devices via the USB port

The USB port can be used to operate or charge most devices

that can be powered via USB (e.g. various mobile phones).

Charging requires the on-board computer to be mounted

and a sufficiently charged battery to be inserted in the eBike.

Open the protective cap(8) for the USB port on the on-

board computer. Use a Micro-A – Micro-B USB charging

cable (available from your Bosch eBike dealer) to connect

the USB port on the external device to the USB port(7) on

the on-board computer.

Once the electrical load has been disconnected, the USB

port must be carefully resealed with the protective cap(8).

USB connections are not waterproof. When cycling in the

rain, do not connect any external devices and make sure

that the USB port is fully sealed by the protective

cover(8).

Important: If electrical loads are connected, this can affect

the range of the eBike.

Displays and configurations of the

on-board computer

Speed and distance indicators

The speedometer (f) always displays the current speed.

You can choose from the following functions in the function

display (combination of text indicator (d) and value indic-

ator (e)):

–<Clock>: Current time

–<Max. speed>: Maximum speed achieved since the last

reset

–<Avg. speed>: Average speed achieved since the last re-

set

–<Trip time>: Journey time since the last reset

–<Range>: Estimated range of the available battery

charge (at constant conditions such as assistance level,

route profile, etc.)

–<Odometer>: Total distance travelled with the eBike

(cannot be reset)

–<Trip distance>: Distance travelled since the last reset

To switch between display functions, press the ibut-

ton(1) on the on-board computer or the ibutton(10) on the

operating unit repeatedly until the required function is dis-

played.

To reset the <Trip distance>, <Trip time> and <Avg.

speed>, switch to one of these three functions and then

press the RESET button (6) until the indicator is set to zero.

This will also reset the values of the other two functions.

To reset the <Max. speed>, switch to this function and then

press the RESET button (6) until the indicator is set to zero.

To reset the <Range>, switch to this function and then press

the RESET button (6) until the indicator is reset to the value

of the factory setting.

If the on-board computer is removed from the holder (4), all

values of the functions are saved and can still be displayed.

Displaying/adjusting basic settings

The basic settings can be displayed and changed regardless

of whether the on-board computer is inserted in the holder

(4) or not. Some settings can only be viewed and changed

when the HMI is inserted. Depending on the equipment of

your eBike, some menu items may not be present.

To go to the basic settings menu, simultaneously press the

RESET button (6) and the i button (1) until <Configura-

tion> appears on the text indicator (d).

To switch between the basic settings, press the i button

(1) on the on-board computer repeatedly until the required

basic setting is displayed. If the on-board computer is inser-

ted in the holder (4), you can also press the i button (10) on

the operating unit.

To change the basic settings, press the on/off button (5)

next to the – indicator to reduce or scroll down, or the light-

ing button (2) next to the + indicator to increase or scroll up.

If the on-board computer is inserted in the holder (4), it is

also possible to change the settings with the –(11) and

+(12) buttons on the operating unit.

To exit the function and save a changed setting, press the

RESET button (6) for three seconds.

You can choose between the following basic settings:

–<– Clock +>: Setting the current time. The time can be

changed faster by pressing the setting buttons for a

longer period.

–<– Wheel circum. +>: Changing the value pre-set by the

manufacturer by ± 5%. This menu item is displayed only

when the on-board computer is in the holder.

–<– English +>: Changing the language of the text indic-

ator. You can choose between German, English, French,

Spanish, Italian, Portuguese, Swedish, Dutch and Danish.

–<– Unit km/mi +>: Displaying the speed and distance in

either kilometres or miles.

–<– Time format +>: Displaying the time in 12-hour or

24-hour format.

–<– Shift recom. on +>/<– Shift recom. off +>: Switch-

ing the shift recommendation display on or off.

–<Power-on hours>: Total time travelled with the eBike

(cannot be changed)

–<Displ. vx.x.x.x>: Display software version.

1 270 020 XBI | (11.03.2020) Bosch eBike Systems

Sparta D-rule M8Tb - 2021 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info