Bedienungsanleitung Sparta M7B - 2016 (Seite 41 von 109) (Deutsch, Englisch, Holländisch, Französisch)

663289

Zoom out

Zoom in

Vorherige Seite

1/109

Nächste Seite

English–3

Bosch eBike Systems 0 275 007 ADC | (1.4.16)

Switching the Push-assistance mode On/Off

The push-assistance feature makes it easier to push the

eBike. The speed in this function depends on the set gear and

cannot exceed 6 km/h (max.). The lower the set gear, the low-

er the speed in the push-assistance function (at full output).

f The push-assistance function may only be used when

pushing the eBike. Danger of injury when the wheels of

the eBike do not have ground contact while using the push-

assistance function.

To activate the push-assistance function, briefly press but-

ton “WALK” on your on-board computer. After activation,

press button “+” within 3 s and keep it pressed. The eBike

drive is switched on.

Note: The push assistance cannot be activated in the “OFF”

assistance level.

The push assistance is switched off as soon as one of the fol-

lowing occurs:

– you release button “+”,

– the wheels of the eBike are blocked (e.g. by actuating the

brakes or impacting against an obstacle),

– the speed exceeds 6 km/h.

Note: On some systems the push-assistance function can be

started directly by pressing the “WALK” button.

Back-pedalling function (optional)

For bikes with back-pedalling function, the pedals rotate

when the push aid is switched on. If the rotating pedals are

blocked, the push aid switches off.

Switching bike lights on/off

In the version which has the bike lights powered by the eBike

system, the front and rear lights can be switched on and off at

the same time via the on-board computer.

Notes on Riding with the eBike System

When does the eBike Drive Unit Operate?

The eBike drive unit assists you when riding, as long as you

step into the pedals. Without pedaling, there is no assistance.

The motor output always depends on the amount of your ped-

aling power.

When applying less pedaling power, the assistance or support

will be lower than when applying a lot of pedaling power. This

applies independent of the assistance Level.

The eBike drive automatically switches off at speeds in excess

of 25 km/h. When the speed falls below 25 km/h, the drive is

automatically available again.

An exception applies to the push-assistance function, in which

the eBike can be pushed at low speed without pedalling. The

pedals may also rotate when the push assistance is used.

The eBike can also be ridden as a normal bicycle without as-

sistance at any time, by either switching off the eBike system

or setting the assistance level to “OFF”. The same applies

when the battery pack is empty.

Interaction of the eBike System with the Bicycle Gears

The bicycle gears should be used as with a normal bicycle,

even with eBike motor assistance (please observe the operat-

ing instructions of your eBike).

Independent of the type of gearing, it is recommended to

briefly interrupt the pedaling while changing gears. This

makes changing gears easier and reduces the wear of the

drive train.

By selecting the right gear, you can increase the speed and

range with the same pedaling effort.

Gathering First Experience

It is recommended to gather first experience with the eBike

away from roads with heavy traffic.

Test the various assistance levels. Start with the lowest assis-

tance level. As soon as you feel confident, you can ride your

eBike in traffic like any other bike.

Test the operating range of your eBike under different condi-

tions before planning longer and more challenging rides.

Influences on the Operating Range

The range is affected by a number of factors, such as:

– Assistance level

– Speed

– Gear changing behaviour

– Tyre type and tyre pressure

– Age and condition of the battery

– Route profile (gradients) and conditions (road surface)

– Headwind and ambient temperature

– Weight of eBike, driver and luggage.

For this reason, it is not possible to precisely predict the

range before and during a trip. General rules:

– With the same assistance level on the eBike drive: The less

energy you need to exert in order to reach a certain speed

(e.g. by changing gears optimally), the less energy the

eBike drive will consume and the higher the range per bat-

tery charge will be.

– The higher the assistance level under otherwise same con-

ditions, the lower the range.

Careful Handling of the eBike

Please observe the operating and storage temperatures of the

eBike components. Protect the drive unit, on-board computer

and battery against extreme temperatures (e.g. from intense

sunlight without adequate ventilation). The components (es-

pecially the battery pack) can become damaged through ex-

treme temperatures.

OBJ_BUCH-2793-001.book Page 3 Friday, April 1, 2016 9:50 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sparta M7B - 2016 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info