Bedienungsanleitung Spartherm Mini H2O (Seite 36 von 44) (Englisch)

810451

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

GB 36

At continuous operation of the H2O fireplace insert low flue gas tem-

peratures can result in chimney damage if the chimney systems are

not suitable. For this reason, we recommend that an hourly wood feed

quantity of 5-6 kg during a burn day not be underranged.

• The thermally activated flue gas damper integrated in the heat exchanger of

the the H2O fireplace insert Mini Z1 H2O-series, Nova E H2O, Varia Ah H2O and

Varia AFDh H2O automatically controls the function. At a sufficiently high flue

gas temperature (approx. 150°C), the flue gas damper closes automatically.

Thus the flow of flue gas is diverted through the heat exchanger. If the flue gas

temperature drops under this temperature again, the flue gas damper opens.

For better efficacy of the heat exchanger, the H2O fireplace insert should be fired

as uniformly as possible, and frequent burn-down to the basic embers should

be avoided in order to obtain heat dissipation of the heat exchanger that is as

uniform as possible and to avoid low chimney temperatures.

• Double glazing (IR reflective surface): Through application of oxidic coat-

ings on the glass surface, infrared spectral components from the com-

bustion chamber are reflected to a great extent. These coatings generate

the interference colours (similar to a rainbow), the so-called IR reflective

surface. Through this colouration, the quality characteristic of the "IR

reflective surface" is visible, i.e. recognisable. This colouration cannot

be removed.

• To operate the fireplace insert with nominal heat output, the following

prerequisites are necessary.

• The fireplace insert must be heated up (wood has already been supplied

2-3 times).

• Combustion must be operated with a closed door.

• Chimney draught: 12-14 Pa

• Wood: Dry beech wood; (moisture < 18%)

• Wood feed quantity: „1.3 Technical data“

• Air setting: Approximately middle position, may need to be slightly

adapted depending on local conditions (see example). During the com-

bustion phase the air lever can be opened for several minutes.

instructions concerning the general operation of the H2O fireplace insert

are provided in the operating instructions for Spartherm fireplace inserts.

The H2O fireplace inserts/heating systems must be filled and vented before

firing. In this process the heating system pressure must be checked (~1.5

bar). After commissioning venting must be executed daily. As soon as cold

air no longer accumulates the interval can be extended.

The heating system and the stove/fireplace insert must be filled with water

treated in accordance with VDI 2035 Sheet 1.

4. OPERATION

For operation, also comply with the operating instructions in the manual

for our fireplace inserts. The information in these installation and operating

instructions refers to special operation of a fireplace insert with integrated

water heat exchanger.

• The combustion chamber door must be self-closing for multiple-con-

nection flue gas systems. The door may only be opened to put on more

firewood or for cleaning when in a cool state. Manipulation of the

closing device is prohibited. If a single-connection system is present,

the combustion chamber door must not be self-closing! However the

combustion chamber doors must always be closed during combustion!

IMPORTANT: The provided heat-resistant glove serves only as ther-

mal protection when activating the operating handle and the cold

hand. The glove is not fire-proof.

• The distance between flammable parts/furniture and the view pane must

be at least 80 cm!

• The fireplace insert is designed for the burning of dry, untreated wood

logs with adhering bark and wood briquettes. Do not use other fuels.

• Operation in the partial load range results in low flue gas temperatures.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spartherm Mini H2O Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spartherm Mini H2O

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info