Bedienungsanleitung Spartherm Nova E H2O (Seite 18 von 28) (Englisch)

810449

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

GB 18

The slot that occurs between the steel

body and the baffle plate is a measure

for reducing the smoke that escapes

from cold tiled stove inserts in the case

of flue gas systems with excessively low

delivery pressure in the start phase.If the

insert is in operation for approx. 15-20

minutes, the necessary delivery pressure

is built up via the after-burning zone

or the flue gas system and the heating

gases are almost exclusively discharged

to the rear.

Through the arrangement of the deflector plate and baffle plate, an

after-burning zone is produced where extremely high heating gas

temperatures occur. Fine dust particles and carbon are burned in this zone.

The combustion chamber lining is removed in the reverse sequence. Impor-

tant: When removing and installing, you must ensure that the chamotte does

not hit against edges, fall over, etc. The service life of the elements of the

combustion chamber lining is reduced through mechanical damage.

If replacement chamotte bricks are required, they can be requested through

the stove fitter with the appropriate order numbers.

3. INITIAL COMMISSIONING

Heat generation systems must only be produced and installed by specialised

companies. The initial commissioning must only be executed by an expert

employee of the installation company. A certificate confirming proper

installation and proper adjustment / function of all control components and

safety components must be given to the owner / operator of the system.

The initial commissioning must only be executed after all necessary

components are connected and all necessary safety devices are integrated

and functional. Before the stove / fireplace insert is placed in service, it

must be filled and ventilated on the heating side (heating network) and water

side (thermal discharge safety device; safety heat exchanger). After the fill-

ing process, check all hydraulic connections for leaks. Operation without

a water-side connection results in irreparable damage and invalidates any

warranty claims!

The first four firings must each be executed with max. 2.0 kg/hour of dry

and thin wood (max. circumference 25 cm). Through this measure the

fireplace insert, the chamotte and the vermiculite are slowly tempered and

thus the moisture that may be present due to storage, transport, etc. is

slowly dissipated. If this does not occur, contamination of the area between

the glass panes, as well as tearing of the chamotte are possible.

Moreover, the operator must be instructed in detail concerning the operation,

function and maintenance of the overall system, including all supplemental

components. In addition, the measures for maintaining safe operation of

the system must be communicated to the operator. Execution of instruction

must be documented in the commissioning protocol! The installation and

operating manual must always be kept in good condition in the vicinity of

the Nova E H2O, where it can be easily accessed.

4. OPERATION

For operation, also comply with the instructions in the operating manual

of the fireplace inserts. The instructions in this installation and operating

manual refer to special operation of a heating insert with integrated water

heat exchanger, such as the Nova E H2O.

Fig. 5d

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spartherm Nova E H2O Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spartherm Nova E H2O

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info