Bedienungsanleitung Spektrum DX18 - SPM18000 (Seite 21 von 42) (Englisch)

726853

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

21SPEKTRUM DX18 • TRANSMITTER INSTRUCTION MANUAL

Calibrate

The Calibration screen stores the potentiometer endpoints for all

proportional controls. It is mandatory to complete the calibration

after changing the stick mode selection.

Calibrating the Transmitter

1. Carefully move the gimbal sticks in a + shape moving from

left to right, then up and down. Press gently on the gimbals

at the stops to achieve an accurate calibration. Return both

gimbal sticks to the center position.

2. Move the Left and Right Side Levers to the top and bottom

positions, then move the side levers to the center position.

IMPORTANT: Only move one side lever at a time during

calibration.

3. Move the Knob to the full clockwise and counter-clockwise

positions, then return the Knob to the center position.

4. Select SAVE to store the calibration.

Transfer SD Card

Import Model

To import an individual model ﬁ le from the SD Card:

1. Save the model ﬁ le to the SD Card.

2. Select the Model List location where you wish to import the

new model ﬁ le.

3. In the SD Card menu, scroll to Select Option and press the

scroll button once.

4. Scroll to Import Model and press the scroll button again to

save the selection. The Select File screen appears.

5. Select the model ﬁ le you wish to import. The Overwrite

screen appears.

IMPORTANT: When you select Import, the transmitter

leaves the System Setup List.

6. Select Import to conﬁ rm overwriting the current model ﬁ le.

The transmitter activates the new model ﬁ le and the Main

Screen appears.

NOTICE: A Preﬂ ight Checklist may appear prior to the Main

Screen if the checklist was active during the model ﬁ le export.

Select MAIN to exit the Preﬂ ight Checklist.

See “Preﬂ ight Setup” for more information.

Import All Models

To import all models from the SD Card, select Import All Models,

and then conﬁ rm by selecting IMPORT.

NOTICE: This function overwrites the model memories. Ensure

that the models currently in your transmitter are saved on an

SD card separate from the transmitter before performing this

function.

You can import a model to any location you want. If you prefer to

use Import All, you can use your PC to rename the SPM ﬁ le. The

ﬁ rst two digits (01 to 50) are the destination model number. Your

SD card can only contain 50 models. Save ﬁ les to folders on the

card then remove from the card all unused models. Files are

selected by their position in the directory table.

Export Model

You can use the Export Model option to export a single model

ﬁ le to the SD Card.

1. Make sure the active model ﬁ le is the one you wish to

Export.

2. Scroll to Select Option and press the scroll button once.

3. Scroll to Export Model and press the scroll button again to

save the selection. The Export to SD screen appears. The

ﬁ rst two characters of the ﬁ le name correspond to the Model

List number (01, for example).

4. (Optional) If you wish to rename the model ﬁ le before export-

ing it to the SD Card:

a. Scroll to “Save to:” and press the scroll wheel. The File

Name screen appears.

b. Assign a new ﬁ le name. The ﬁ le name can contain up to

25 characters including the .SPM ﬁ le extension.

c. When you are done assigning the new ﬁ le name, press

the Back button to return to the Export to SD screen.

5. Select Export to save the ﬁ le to the SD Card. When the

export is complete, the transmitter returns to the SD Card

Menu screen.

Export All Models

To export all models to the SD Card:

1. Select Export All Models in the SD Card Menu options. The

Export All Models screen appears.

IMPORTANT: Export All Models will overwrite any model

ﬁ les that are:

a. Already saved on the SD Card and

b. You are exporting a model ﬁ le with the same

name. Always save model ﬁ les to a different SD

Card if you are not sure.

2. Select Export to overwrite ﬁ les on the SD Card or Cancel to

return to the SD Card Menu.

Update AirWare

IMPORTANT: The orange LED Spektrum bars ﬂ ash and a status

bar appears on the screen when AirWare updates are installing.

Never power off the transmitter when AirWare updates are

installing. Doing so may damage the system ﬁ les.

Before installing any AirWare ﬁ les, always Export All Models to

an SD Card separate from the SD Card containing the AirWare

update. The AirWare update may erase all model ﬁ les.

For more information on AirWare updates, visit

Community.SpektrumRC.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spektrum DX18 - SPM18000 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spektrum DX18 - SPM18000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info