Bedienungsanleitung Spektrum DX18 - SPM18000 (Seite 22 von 42) (Englisch)

726853

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

22 SPEKTRUM DX18 • TRANSMITTER INSTRUCTION MANUAL

FUNCTION LIST

Servo Setup

The Servo Setup menu contains the following functions:

• Travel Adjust

• Sub-Trim

• Reverse

• Speed

• Abs. (Absolute) Travel

• Balance

Travel Adjust

Travel Adjust sets the overall travel or endpoints of the servo arm

movement.

To adjust travel values:

1. Scroll to the channel you wish to adjust and press the scroll

wheel. When adjusting travel values assigned to a control

stick:

a. Center the control stick to adjust both directions at the

same time.

b. To adjust travel in one direction only, move the control

stick in the direction you wish to adjust. Continue holding

the control stick in the desired direction while you are

adjusting the travel value.

2. Scroll left or right to adjust the travel value. Press the scroll

wheel to save the selection.

Sub-Trim

Sub-Trim adjusts the servo travel center point. If X-Plus is active,

sub-trim for X-Plus channels appears on the second screen.

CAUTION Use only small sub-trim values or you may

cause damage to the servo.

Reverse

Use the Reverse menu to reverse the channel direction, for ex-

ample, if the elevator servo moves up and it should move down.

To reverse a channel direction:

1. Scroll to Travel and press the scroll wheel. Scroll left until

Reverse appears and press the scroll wheel again to save the

selection.

2. Scroll to the channel you wish to reverse and press the scroll

wheel.

CAUTION: If you reverse the Throttle channel, a

conﬁ rmation screen appears. Select YES to reverse the

channel. A second screen appears, reminding you to bind your

transmitter and receiver. Failure to re-bind the transmitter and

receiver will result in the throttle moving to full throttle if failsafe

activates.

CAUTION: Always perform a control test after making

adjustments to conﬁ rm the model responds properly.

After adjusting servos, always rebind the transmitter and receiver

to set the failsafe position.

Speed

The Speed menu enables you to increase the response time on

any individual channel such as retracts.

The Speed is adjustable in the following ranges:

• Nor (No Delay) - 0.9s in 0.1 second increments

• 1s - 2s in 0.2 second increments

• 2s - 8s in 1 second increments

To adjust the Speed:

1. Scroll to the channel you wish to adjust and press the scroll

wheel.

2. Scroll left or right to adjust the speed and press the scroll

wheel to save the selection.

Automatically Installing AirWare Updates

To install the most recent AirWare update:

1. Download the update from Community.SpektrumRC.com and

save it to the SD Card.

2. Power off the transmitter and install the SD Card in the

transmitter.

3. Power on the transmitter and the update automatically

installs in the transmitter.

Manually Installing AirWare Updates

1. Save the desired AirWare version to the SD Card.

2. Select Update Firmware in the SD Card Menu options. The

Select File screen apepars.

3. Select the desired AirWare version from the File List. When

updates are installing, the transmitter screen is dark. The

orange LED Spektrum bars ﬂ ash and the update status bar

appears on the screen.

NOTICE: Do not power off the transmiter when updates are

installing. Doing so will damage the transmitter.

Select this when

X-Plus channels are

active

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spektrum DX18 - SPM18000 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spektrum DX18 - SPM18000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info