Bedienungsanleitung Spektrum DX8 (Seite 39 von 42) (Englisch)

708059

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite







The following information is for item numbers: SPM8800EU

The following information is for item numbers: SPM88001FR

Declaration of Conformity

(in accordance with ISO/IEC 17050-1

No. HH2010080203

Product(s): Spektrum DX8 Transmitter

Item Number(s): SPM8800EU, SPM88001FR

Equipment class: 2

The object of declaration described above is in conformity with the

requirements of the speciﬁcations listed below, following the provisions of

the European R&TTE directive 1999/5/EC:

EN 60950 Safety

EN 300-328 Technical requirements for Radio equipment

EN 301 489 General EMC requirements for Radio equipment

Signed for and on behalf of:

Horizon Hobby, Inc.

Champaign, IL USA

Aug 02, 2010





This product must not be disposed of with other waste. Instead, it

is the user’s responsibility to dispose of their waste equipment by handing it

over to a designated collection point for the recycling of waste electrical and

electronic equipment. The separate collection and recycling of your waste

equipment at the time of disposal will help to conserve natural resources

and ensure that it is recycled in a manner that protects human health and the

environment. For more information about where you can drop off your waste

equipment for recycling, please contact your local city ofﬁce, your household

waste disposal service or where you purchased the product.





The DX8 can be easily converted to mode 1, 2, 3, or 4. This conversion requires

a mechanical and a programming change. (Stick and switch positions for mode

1 and 2 are illustrated on pages 8 and 9.) Following are detailed instructions on

making mode changes



Mechanical conversion is required to switch between modes 1 and 2 or between

modes 3 and 4. The centering spring for elevator and the friction straps for

throttle must be engaged on the appropriate gimbal and throttle limiting wedges

must be swapped.

Step 1. Carefully pull back the rear grips and side rubber panels and unscrew

the six Phillips head screws shown.

Step 2. Remove the back case noting that a wire harness connects the back

to the main case. Carefully set the main case to the left side of the

transmitter being careful not to damage the wire harness.

(Cages are pictured in white for clariﬁcation. The cages

in your transmitter are black.)



Step 3. Locate the silver throttle friction straps on both gimbals. Two straps are

located on each gimbal. One strap engages a serrated section on the

gimbal giving a ratcheted throttle feel while the other strap engages a

smooth section on the gimbal giving a smooth friction feel.

AT BG CZ CY DE

DK ES FI GR HU

IE IT LT LU LV

MT NL PL PT RO

SE SI SK UK

AT BG CZ CY DE

DK ES FI FR GR

HU IE IT LT LU

LV MT NL PL PT

RO SE SI SK UK

Steven A. Hall

Vice President

International Operations and Risk Management

Horizon Hobby, Inc.

2155

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spektrum DX8 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spektrum DX8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info