Bedienungsanleitung Spektrum SPM 18000 - DX18 (Seite 10 von 42) (Englisch)

606958

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

10 SPEKTRUM DX18 • TRANSMITTER INSTRUCTION MANUAL

PROGRAMMING FAILSAFE POSITIONS

You establish failsafe positions when you bind your transmitter and receiver. If radio signal connection is lost between the transmitter

and receiver, the receiver immediately moves the aircraft control surfaces to the failsafe positions. The Spektrum AR9020 receiver

has three failsafes programming options: SmartSafe, Hold Last Command, and Preset.

If you assign the receiver THRO channel to a transmitter channel other than throttle , we recommend using Preset failsafe with the

throttle in the low position.

NOTICE: Failsafe features vary according to receiver. Always consult the receiver instruction manual for failsafe features.

Before ﬂ ight, ALWAYS conﬁ rm the failsafe functions as you would expect.

SmartSafe Failsafe

SmartSafe is a failsafe acting only on the throttle channel that

offers the following beneﬁ ts:

• Prevents electric motors from operating when the receiver

power is on and the transmitter power is off.

• Prevents the speed controller from arming until the throttle is

moved to the low throttle position.

• Powers off an electric motor and reduces gas/glow engines

to idle if signal is lost.

To Program SmartSafe, move the throttle to the low or off posi-

tion before putting the transmitter in bind mode.

To Test the SmartSafe

1. Power the transmitter and receiver on.

2. Power off the transmitter. The throttle should immediately

move to the failsafe position.

CAUTION: Make sure the aircraft is restrained on the

ground. If failsafe is not set, your aircraft might advance to mid

or full throttle.

Hold Last Command

The Hold Last Command failsafe maintains the last command

on all channels except throttle; if radio signal is lost, the aircraft

maintains the commanded heading until the receiver regains

signal.

To program Hold Last Command, follow the provided binding

instructions in this instruction manual.

To Test Hold Last Command

1. Power on the transmitter and receiver.

2. Move one of the control sticks and hold the input.

3. While holding the control input, for example, a small amount

of rudder, power off the transmitter. The rudder should

maintain the input command.

CAUTION: Make sure the aircraft is restrained on the

ground. If the failsafe does not function as you would expect, the

aircraft throttle might advance to mid or full throttle.

Preset Failsafe

The Preset failsafe moves all channels to their programmed

failsafe positions.

We recommend using Preset failsafe to deploy spoilers on

sailplanes to prevent a ﬂ yaway if radio signal is lost.

To program Preset failsafe:

1. Insert the bind plug in the bind port on the receiver and

power on the receiver.

2. Remove the bind plug when the orange LED on the main

receiver and all attached remote receivers ﬂ ash rapidly. The

orange receiver LEDs continue ﬂ ashing.

3. Move the transmitter control sticks and switches to the

desired Preset failsafe position. Power the transmitter on.

4. Failsafe programming is complete when the orange LEDs on

the transmitter and all receivers are on solid.

CAUTION: Make sure the aircraft is restrained on the

ground. If the failsafe does not function as you would

expect, the aircraft throttle might advance to mid or full throttle.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spektrum SPM 18000 - DX18 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spektrum SPM 18000 - DX18

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info