518565
19
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
15
Elliptical Trainer
XE395
This is the quickest way to start a workout. After the console powers
up you just press the Start key to begin, this will initiate the Quick
Start mode. In Quick Start the Time will count up from zero and the
workload may be adjusted manually by pressing the Level Up/
Down buttons. The dot matrix display will have only the bottom row
lit at rst. As you increase the work load more rows will light indicating
a harder workout. The elliptical will get harder to pedal as the rows increase.
There are 20 levels of resistance available for plenty of variety. The rst 5 levels are very easy
workloads and the changes between levels are set to a good progression for de-conditioned
users. Levels 6-10 are more challenging, but the increases in resistance from one level to the
next remain small. Levels 11-15 start getting tough as the levels jump more dramatically. Levels
16-20 are extremely hard and are good for short interval peaks and elite athletic training.
Quick Start
The Message Center will initially be displaying the Program name.
When in scan mode during a program, speed will be displayed for four
seconds, then move on and display Watts (indication of workload). If
100 watts is displayed, you are doing enough work to keep a 100-watt
light bulb lit. The data changes to Laps completed, Segment time, Max
level. Pressing the Enter button again will bring you back to
the beginning.
The Stop button actually has several functions. Pressing the Stop key
once during a program will pause the program for 5 minutes. If you
need to get a drink, answer the phone or any of the many things that
could interrupt your workout, this is a great feature. To resume your
workout during Pause, just press the Start key. If the Stop button is
pressed twice during a workout, the program will end and the console will display your
Workout Summary (Total time, Avg. Speed, Avg. Watts, Avg. HR, total Laps). If the Stop key is
held down for 3 seconds or a third time during the program, the console will perform a
complete Reset. During data entry for a program the Stop key performs a previous
screen or segment function. This allows you to go back to change programming data.
Basic Information
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

spirit-xe-395-2013

Suche zurücksetzen

  • Ich kann die levelstärke am Handstück nicht mehr einstellen ? Eingereicht am 10-5-2022 18:43

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Spirit XE-395 2013 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Spirit XE-395 2013

Spirit XE-395 2013 Bedienungsanleitung - Holländisch - 11 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info