Bedienungsanleitung Spirit XT-485 (Seite 20 von 40) (Englisch)

518626

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Treadmill

XT485

STEP 1: Press and release the Start key to wake display up (if not already on).

Note: Installing the tether key will also wake up the console.

STEP 2: Press and release the Start key to begin belt movement, at .5 mph, then adjust to the desired

speed using the Speed + / - or Fast/Slow keys (console or hand rail). You may also use the quick

speed key, then 0 through 9 to adjust the speed.

STEP 3: To slow the tread-belt press and hold the Speed + / - or Fast/Slow keys (console or hand

rail) to the desired speed. You may also adjust to the desired speed by pressing Quick Speed and then

0 through 9.

STEP 4: To adjust the Incline level, press and hold the Incline + / - or Up / Down keys; you may also

adjust to the desired incline by pressing the Quick Incline key and then 0 through 9.

STEP 5: To stop the tread-belt press and release the Stop key.

Quick Start/ Manual Operation

Pause/Stop/Preset

STEP 1: When the treadmill is running the pause feature may be utilized by pressing the red Stop key

once. This will slowly decelerate the tread-belt to a stop. The incline will go to zero percent. The Time,

Distance and Calorie readings will hold while the unit is in the pause mode. After 5 minutes the display

will reset and return to the start up screen.

STEP 2: To resume your exercise, when in Pause mode, press the Start key. The speed and incline will

return to their previous settings.

Pause is executed when the Stop button is pressed once. If the Stop key is pressed a second time,

the program will end and a workout summary will be displayed. If the Stop button is pressed a third

time, the console will return to the idle mode (start up) screen. If the Stop button is held down for

more than 3 seconds the console will reset.

Incline

Incline may be adjusted anytime after belt movement.

Press and hold the Incline + / - or Up/Down keys (console or hand rail) to achieve desired level

of effort. You may also choose a more rapid increase / decrease by selecting the Quick Incline key,

then 0 through 9.

The display will indicate incline percent in increments of .5 as adjustments are made.

The incline will return to zero unless the main power switch or safety key are turned off while incline

is at a higher setting.

Dot Matrix Center Display

Twenty columns of boxes (10 high) indicate each segment of a workout. The boxes only show an

approximate level (speed/incline) of effort. They do not necessarily indicate a specic value - only an

approximate percent to compare levels of intensity. In Manual Operation the Speed / Incline dot matrix

window will build a prole “picture” as values are changed during a workout.

The speed and incline proles will display half of the program at one time (10 columns). They will both

scroll right to left. The Lap track will move in a counterclockwise direction.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spirit XT-485 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spirit XT-485

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info