Bedienungsanleitung Spypoint Tiny-W3 (Seite 25 von 45) (Englisch)

569578

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

VIEW

Allows the user to view or delete the recorded photos on the controller

screen or on a television.

• Viewing with the screen of the controller:

When VIEW mode is selected, choose the name of the desired camera and

press OK. The last recorded photo automatically appears on the screen.

Press f or g to view the next or previous. Press OK to view the different

options available.

Date and time: To view the date and time printed on the photo.

Protect: Allows the user to protect the photo to prevent it from

being deleted by selecting "Delete All".

Delete: Allows the user to erase from the memory card, the

photo seen on the screen.

Delete all: Allows the user to erase from the memory card, all

stored photos, with the exception of protected photos.

Format: Allows the user to format memory card and delete all

protected photos.

Exit: Allows the user to exit the menu to return to the viewing

screen.

Press the  to enlarge the photo on the screen or  to return to the original

size. When the photo is enlarged, press OK to allow movement in the photo.

Then use the navigation buttons to explore different parts of the photo. To

disable the mouvement mode, press OK again.

Setup • Controller (BLACKBOX

-D

)

REMOTE

Allows the user to see the camera status, to start/stop the camera, to

verify the quality of the wireless signal and to have an overview of the eld

of view of the camera in real time. If more than one camera is synchronized

to the controller, choose one from those available.

Get camera status

Indicates the battery level and the percentage of used space in the memory

card of the camera.

Start/stop caméra

Allows the user to remotely stop or restart photos taking. These options can

be used if the user is working in the zone of detection of the camera and he

doesn’t want photos to be taken. When nished, he can remotely restart the

camera to continue taking photos.

Range test

Allows the user to check the quality of the wireless signal between the cam-

era and the controller. If the icon of the wireless signal is red, the

signal is too weak. Bring closer or move the controller. If the icon

of the wireless signal is green and stays green for more than 10

seconds, the signal is strong enough and stable to enable wire-

less transmission of photos to the controller.

Live view

Allows a live preview of the eld of view of the camera in real time (1 photo

per second is sent to the controller). Press the BACK button to return to the

previous menu.

This mode requires more battery power.

Note: The message "Waiting for camera" appears on the screen of the

BLACKBOX

-D if the controller is not synchronized with the camera or if

the wrong camera ID is selected.

Note: The preview can also be on a TV using the TV-OUT port of the

controller (see View section, p.25).

Note: The number of yellow stars that appear to the right of the screen

corresponds to the resolution of the photos stored in the BLACKBOX

-D.

=Low résolution =Medium résolution =High résolution

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spypoint Tiny-W3 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spypoint Tiny-W3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info