Bedienungsanleitung Spypoint Tiny-W3 (Seite 26 von 45) (Englisch)

569578

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

USING MULTIPLE CONTROLLERS IN THE SAME AREA:

When multiple controllers are installed in the same area of transmission, it

is necessary to manually synchronize each controller with it’s camera(s) in

a different group.

To do this:

1. On the controller, select the SIGNAL mode and press OK.

2. Hold down the  button for 3 seconds to reach the group option located

in the upper right corner of the screen controller and press OK.

3. Use  or  buttons to assign a new group to each additional controller

(maximum 5 BLACKBOX

-D) and press OK.

4. Synchronize the cameras to the new group (follow the steps in the

PREPARING THE CAMERA (P.26) and PREPARING THE BLACKBOX

-D

CONTROLLER (p.26) sections.

Setup • Controller (BLACKBOX

-D

)

• Watching on TV:

Allows the user to view or delete the photos directly on a TV.

1. Turn on the controller.

2. Connect the yellow end of the RCA cable supplied into the VIDEO IN of

the TV and the other end into the TV OUT of the controller. The options

are the same as viewing on the screen of the camera (previously

mentioned)

SYNCHRONIZE A NEW CAMERA TO THE CONTROLLER:

Preparing the camera:

1. Set the name of the camera:

• When SETTINGS is selected, choose "Camera ID" and press OK.

• Determine the name of the camera by pressing the  or  buttons to

change the letter and press OK to go to the next space.

2. Continue changing other parameters of the camera as needed.

3. To enable communication with the controller:

• While still in the SETTINGS menu, select "Wireless" option and press

OK.

• Select "On" and conrm the selection by pressing OK; then on  to

return to the previous menu.

4. Select the SIGNAL mode and press OK. The camera searches for the

controller.

Preparing the BLACKBOX

-D controller:

1. Select the SIGNAL mode .

2. Press on "Add new camera" (to see this option, select a blue camera icon

using f or g buttons. The "Sync" icon changes from

red to green in the camera screen when synchronization is

successful.

Note: A camera cannot be synchronized to multiple controllers.

RCA

Notes:

• It’s possible to synchronize up to 10 cameras to a single controller.

• If the name of the camera is changed, it is necessary to resynchronize

the devices by following the steps in the PREPARING THE CAMERA

(P.26) and PREPARING THE CONTROLLER (p.26) sections.

• The "Reset All" option allows to nd the original settings.

• It is possible to easily retrace the BLACKBOX

-D controller with a buzzer

signal by pressing the FN button on the RC-1 remote control. The remote

control must be previously synchronized with the camera, which commu-

nicates with the controller. The remote control (sold separately, p.34)

is part of the product line compatible with the REMOS

technology.

Sync

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spypoint Tiny-W3 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spypoint Tiny-W3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info