Bedienungsanleitung Spypoint Tiny-WBF (Seite 17 von 45) (Englisch)

569575

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

Settings • Camera

Wireless: (TINY-PLUS, TINY-W

, TINY-W

)

(On/Off)

Enables or disables the wireless transmission of photos to the BLACKBOX

receiver (TINY-W

) or to the BLACKBOX

-D controller (TINY-PLUS, TINY-

When the transmission is enabled:

• Only photos are transmitted to the receiver and to the controller, not

videos.

• The quality of the photos recorded on the receiver and the controller is

reduced to maximize transmission:

8 or 10MP = 800 x 600 pixels

5MP = 640 x 480 pixels

3MP = 320 x 240 pixels

• When the TIME LAPSE mode is enabled, the photos are sent to the

receiver and to the controller except for the "30s" setting.

• When the delay setting "10s" is selected, the time between each

detection is calculated when the transmission is completed. For

example, if the transmission takes two seconds, the time between the

two detections is 12 seconds.

Note: When the "Wireless" option is activated, it is only possible to take up

to 2 consecutive shots (TINY-PLUS, TINY-W

Delay:

(10s/1m/3m/5m/10m/15m/30m)

Allows the user to choose the time interval between each detection before

the camera records the next photo or video. A longer delay minimize the

number of photos taken and maximize the battery life. A shorter delay

maximize the number of photos taken but requires more battery power.

The shorter times interval are recommended when the cameras is used

for security purposes.

Additional setting:

It is possible to decrease the delay between detections to 10 seconds

(instead of 1 minute) by using the following procedure.

Note that the battery life will be affected.

1. Turn OFF the camera.

2. Press and hold the  button and turn ON the camera.

3. "10sec enabled" appears on the screen meaning the minimum delay is

now 10 seconds. If this option is used, the 30 minute delay disappears.

4. To reset the camera to 1 minute delay, follow the same procedure.

"10sec disabled" appears on the screen. (see next gure)

Multi-shot:

(1/2/3/4/5/6 consecutive shots)

Takes up to 6 consecutive shots at each detection, with a 10-second delay

between each photo. This option allows the user to get up to 6 photos

from different angles when the camera is in PHOTO mode.

Video length:

(10s/30s/60s/90s)

Allows the user to select the duration of the recording when the camera

is set in VIDEO mode.

Language:

(English/Français/Deutsch/Italiano/Español)

Allows the user to select a language for the camera menus.

Sensitivity:

(Low/Medium/High)

Allows the user to choose the detection sensitivity of the camera. A higher

sensitivity allows the user to take more photos.

The camera will only detect sources of heat in movement. Make sure to

have the least possible objects in front of the camera during the positio-

ning. This prevents the camera to take photos when oriented towards the

sun while an object moves in front of the camera (e.g. a branch).

P INTSPY INTPSPY

10SEC ENABLED

P INTSPY INTPSPY

10SEC DISABLED

P INTSPY INTPSPY

10SEC ENABLED

P INTSPY INTPSPY

10SEC DISABLED

10 s delay 1 min delay

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spypoint Tiny-WBF Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spypoint Tiny-WBF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info