Bedienungsanleitung Stadler Form Ben (Seite 12 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

807163

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

water tank (3) sideways again, diagonal to Ben, and lift the water tank up

and insert it again. Important: Please do not move Ben when it is filled

with water. The water could splash out of the interior tank and into the

electronics.

3. Next, start Ben by pressing the On/Off button (6). The LEDs for the fire-

place effect will then light up, and the mist will be visible as it comes out

of the appliance (7) at variable output controller (8) height.

4. By turning the variable output controller (8), you can adjust the humidifier

output as you wish.

5. If you are disturbed by the brightness of the illuminated mist (in the bed-

room, for example), you can reduce the brightness of the LEDs by pressing

the dimmer button (9). You can choose between three different modes:

• Normal mode (default mode)

• Dimmed mode (push once)

• Lights-out mode (push twice)

• By pushing the dimmer button once more, you can go back into normal

mode.

6. You can also use Ben to fragrance the room. We ask that you be sparing

when dealing with fragrances as too much can lead to malfunctions and

damage to the unit. To use fragrances, remove the water tank (3) from the

unit and trickle the fragrance directly into the water tray (10) (see page 5).

Add a maximum of 2–3 drops of fragrance per full tank of water. Install

the water tank back into the unit.

Tip: Would you like to change the fragrance? Remove the water tank

from the unit, pour the remaining water out and clean the humidifier (see

«Cleaning»). Now Ben is ready to distribute a different fragrance of your

choice around the room. The intensity with which the aroma is diffused

can be adjusted smoothly by sliding the variable output controller.

7. The water level indicator (11) glows red when the water needs to be re-

filled. Remove the water tank (3) and fill it up with tap water. Replace the

water tank. The appliance will resume operation after a few seconds.

8. Would you like to refill the water during operation? You can simply remove

the water tank (3) and fill it up. The unit will operate for around a further

5 to 10 minutes with the water that remains in the system. Put the water

tank back into the unit within this time period and Ben can continue opera-

tion without stopping at all.

Note: Should you see droplets (or other signs of dampness) on or around

the unit, this is condensed water from the humidifier. This means that the

air can no longer absorb the moisture from the humidifier. Please reduce the

humidifier output until you can no longer see any droplets.

Cleaning

Before each piece of maintenance and after every use, turn off the unit

and remove the plug from the plug socket. Before you clean Ben, the power

adapter (1) must be separated from the power adapter connection (2).

Attention: Never submerge the unit in water (danger of short circuiting).

• For hygienic reasons and to ensure proper operation, we recommend the

following cleaning intervals.

•Daily: Fill the water tank (3) with fresh, cold tap water. If the appliance

is not used for several days, empty the water from the water tray (10) be-

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stadler Form Ben Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info