Bedienungsanleitung Stadler Form Ben (Seite 13 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

807163

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

forehand and if necessary, clean it with a bit of dish detergent and a clean

cloth. Fill fresh water into the water tank (3), before putting the appliance

back into operation.

•Every 2 weeks: First remove the water tank (3), the lid (7), the cover (16)

and the Water Cube™ (12). Clean the inside of the water tray (10,14,17)

thoroughly with a bit of dish detergent, warm water and a soft, clean

cloth, sponge or brush. Use diluted descaling agent (mix according to the

manufacturer’s instructions) for lime deposits. Then rinse the water tray

(10) thoroughly with cold water and put the water tank (3), the lid (7), the

cover (16) and the Water Cube back in.

•Descaling at least 1x per month. Remove the water tank (3) the lid (7),

the cover (16) and the Water Cube (12). If limescale deposits form in the

water tray (10) we recommend using Stadler Form Cleaner & Descaler

(www.stadlerform.com/accessories). Alternatively, you can use a house-

hold decalcifier or vinegar. Fill a cup with 200 ml of tap water mixed with

descaling agent (mix according to the manufacturer’s instructions). Pour

the liquid carefully into the water tray (10). Be sure that no liquid enters

the air outlet opening (13). This will damage the appliance and will void

any claim to the warranty.

• Let the descaling agent allow to take effect according to manufacturer’s

instructions (approx. 30 min.). Check in the water tray (10) if the limescale

on the ultrasonic membrane (14) has dissolved.

• If limescale residue remains, the ultrasonic membrane (14) can be cleaned

with the help of the cleaning brush (15) (front- and backside). Do not try to

scrape them with a hard object.

• For stubborn limescale, we recommend descaling the appliance several

times in a row.

• To rinse, now fill the cup with 200 ml of tap water and carefully pour the

liquid into the water tray (10). Pour the water out of the appliance at the

front right corner. Repeat the process until there is no more descaling

agent in the water tray (10). Place the Water Cube (12), the lid (7), the

cover (16) and the water tank (3) back into the appliance.

•Regularly as required: For external cleaning, rub with a damp cloth and

then dry thoroughly. If the top of the lid (7) shows water and/or fragrance

deposits, please clean it using a damp cloth and a bit of dish detergent.

•At the end of the season: Before putting away the appliance at the

end of the season, decalcify as described above. Then clean it thoroughly

inside and out and let it dry completely. Insert a new Water Cube (12) and

anticalc cartridge (19, optional) in order for your appliance to be ready for

the start of the next season. Do not put the appliance away with a used

anticalc cartridge in place, as the granules inside will remain moist for a

long time.

Replacement of the anticalc cartridge (optional accessory)

• Please find the recommended replacement intervals in the table (see «Be-

fore setup»).

• Tip: The efficiency of the cartridge can be inspected with a simple test.

Hold a small mirror in the mist for a few seconds. If there are then white

deposits (calcium carbonate) on the mirror, then the cartridge needs

changing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stadler Form Ben Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info