Bedienungsanleitung Stanley FME190 (Seite 6 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

622142

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISH

(Original instructions)

ENGLISH

(Original instructions)

Labels on tool

The following pictograms along with the date code are shown

on the tool:

Warning! To reduce the risk of injury, the user

must read the instruction manual.

Wear safety glasses or goggles.

Wear ear protection.

Wear a dust mask.

Wear gloves when handling blades.

Electrical safety

This tool is double insulated; therefore no earth

wire is required. Always check that the power

supply corresponds to the voltage on the rating

plate.

u Inspect tool cords periodically. If the supply cord is

damaged, it must be replaced by the manufacturer or an

authorised Stanley Fat Max Service Centre in order to

avoid a hazard.

Voltage drops

Inrush currents cause short-time voltage drops. Under

unfavourable power supply conditions, other equipment may

be affected. If the system impedance of the power supply is

lower than 0.34 Ω, disturbances are unlikely to occur.

Using an extension cable

u Always use an approved extension cable suitable for the

power input of this tool (see technical data). Before use,

inspect the extension cable for signs of damage, wear and

ageing.

u Replace the extension cable if damaged or defective.

When using a cable reel, always unwind the cable

completely. Use of an extension cable not suitable for the

power input of the tool or which is damaged or defective

may result in a risk of re and electric shock.

Features

This tool includes some or all of the following features.

1. Air vents

2. Handle (left & right)

3. Socket

4. Shaft

5. Stirrer

6. lock-on button

7. Variable speed switch

8. Power cord with plug

9. Mounting spanner 22mm (x 2)

Assembly.

Unpacking.

u Unpack all parts and lay them on a at, stable surface.

u Remove all packing materials and shipping devices, if

applicable.

u Make sure the delivery contents are complete and free

of any damage. If you nd that parts are missing or show

damage do not use the product but contact your dealer.

Using an incomplete or damaged product represents a

hazard to people and property.

u Ensure that you have all the accessories and tools needed

for assembly and operation. This also includes suitable

personal protective equipment.

Warning! The product and the packaging are not children’s

toys! Children must not play with plastic bags, sheets and

small parts! There is a danger of choking and suffocation!

Setup

Warning! The product must be fully assembled before

operation! Do not use a product that is only partly assembled

or assembled with damaged parts! Follow the assembly

instructions step-by-step and use the pictures provided as a

visual guide to easily assemble the product! Do not connect

the product to power supply before it is completely assembled!

Stirrer

Warning! Stirrers are available in different types and with

different shape and diameters. Always use the correct

stirrer according to the intended use! Observe the technical

requirements of this product (see section “Technical

specications”) when purchasing and using stirrer! Stirrer

becomes hot during use! Handle them carefully! Wear

protective gloves when handling stirrer in order to avoid

injuries like burns and cuts!

Attaching (Fig.A, Fig.B, Fig.C, Fig.D)

u Align the stirrer (5) with the shaft (4). Screw the stirrer (5)

clockwise onto the lower end of the shaft (4) (Fig. A).

u Lock the welded nut of the shaft (4) with one mounting

spanner (9) and secure the stirrer (5) clockwise with the

other (9) gripping the welded nut (Fig. B).

Note! Tighten the connection hand tight at rst, before using

the spanners.

u Align the shaft (4) with the socket (3). Screw the shaft end

with welded nut clockwise into the socket (3) (Fig. C).

u Lock the socket (3) with one mounting spanner (9) and

secure the shaft (4) clockwise with another mounting

spanner (9) gripping the welded nut (Fig. D).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley FME190 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info