Bedienungsanleitung Stanley FME340 (Seite 5 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

622180

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

ENGLISH

(Original instructions)

Warning! The vibration emission value during actual use of

the power tool can differ from the declared value depending

on the ways in which the tool is used. The vibration level may

increase above the level stated.

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons regularly

using power tools in employment, an estimation of vibration

exposure should consider, the actual conditions of use and the

way the tool is used, including taking account of all parts of the

operating cycle such as the times when the tool is switched off

and when it is running idle in addition to the trigger time.

Labels on tool

The following symbols are shown on the tool:

Warning! To reduce the risk of injury, the user

must read the instruction manual.

Electrical safety

This tool is double insulated; therefore no earth

wire is required. Always check that the power

supply corresponds to the voltage on the rating

plate.

u If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Stanley Fat Max Service

Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1. Trigger switch

2. Lock-on button

3. Saw blade locking lever

4. Blade clamp

5. Shoe plate

6. Shoe beveling lever

7. Variable speed control

8. Cutting action lever

9. Shoe sleve

10. LED work light

Assembly

Warning! Before assembly, remove the battery from the tool

and make sure that the saw blade has stopped. Used saw

blades may be hot.

Fitting and removing the saw blade (g. A)

u Hold the saw blade (11) with the teeth facing forward.

u Lift the saw blade locking lever (3) upwards.

u Insert the shank of the blade fully into the blade clamp (4)

as far as it will go.

u Release the lever.

u To remove the saw blade (11), lift the saw blade locking

lever (3) upwards and pull the blade out.

Fitting and removing the shoe sleeve (g. B)

The non scratch shoe sleeve (9) should be used when cutting

surfaces that scratch easily, such as laminate, veneer, or

paint. It can also be used to protect the shoe surface during

transportation and storage.

To attach shoe sleeve:

u place the front of the shoe plate (5) into the front of the

shoe sleeve (9).

u Lower the tool into the shoe sleve (9). The shoe sleeve

will click securely onto the rear of the shoe.

To remove shoe sleeve:

u Grasp the shoe sleeve from the bottom at the two rear

tabs and pull down and away from the shoe plate (5).

Use

Warning! Let the tool work at its own pace. Do not overload.

Warning! Never use the tool when the saw shoe is loose or

removed.

Switching on and off (g. C)

Warning! Check that the tool is not locked ON before con-

necting it to a power supply. If the trigger switch is locked ON

when the tool is connected to the power supply, it will start im-

mediately. Damage to your tool or personal injury may result..

u To switch the tool on, press the trigger switch (1). The tool

speed depends on how far you press the switch.

u For continuous operation, press the lock-on button (2) and

release the variable speed switch. This option is available

only at full speed.

u To switch the tool off, release the trigger switch. To switch

the tool off when in continuous operation, press the trigger

switch once more and release it.

Variable speed control

The variable speed on/off switch offers a choice of speeds for

greatly improved cutting rates in various materials.

u To set the speed, turn the variable speed control (7) to the

required setting.

Bevel cutting (g. D & E)

The shoe plate can be set to a left or right bevel angle of up

to 45°.

To set the bevel angle:

u Pull the shoe beveling lever (6) out and away from the

saw to unlock the shoe plate (5).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley FME340 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info