Bedienungsanleitung Stanley FME790 (Seite 6 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

720659

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ENGLISH

(Original instructions)

The stand compatability test

With the saw mounted on the stand:

u Check for t and function. There shall be no interference

of mitre saw throughout the full range of mitre, bevel and

compound cut.

u The Work Support can be adjusted to a height that is level

with the table top of the mitre saw.

Using the scalable bracket (Fig. H & I)

u Use the scalable bracket when working with large work

pieces.

Extending the rails

u Loosen the locking screw (8).

u Extend the scalable bracket to the desired position.

u Tighten the locking screw.

u When the scalable bracket has been extended to the

warning position, it should not be further extended.

Adjusting height of the roller brackets

u Loosen the roller bracket adjustment screw at the end of

the scalable bracket, as shown in Figure I. Lift the roller

bracket to a height that is level with the table top of the

mitre saw.

u Retighten knob and repeat on the opposite side.

Warning: To reduce the risk of injury, make sure the roller

brackets are adjusted so that the workpiece sits at on the

mitre saw table. Workpieces that do not sit at could cause the

blade to bind during cutting.

Carry Handle (Fig. J)

A handle (6) has been supplied to transport the mitre saw

stand to and from the work site.

WARNING: To reduce the risk of personal injury, DO NOT

attempt to store the stand with the saw attached. Loss of

control may result.

Maintenance

Warning:

To reduce the risk of injury, periodically ensure all

fasteners are attached and adjusted according to the

assembly instructions in this manual.

Warning: When servicing, use only our identical replacement

parts. The use of any other parts may cause a hazard or result

in product damage.

Warning: Avoid using solvents when cleaning plastic parts.

Most plastics are susceptible to damage from commercial

solvents and may be damaged by use of solvents. Use clean

cloths to remove dirt, dust, oil, grease, etc.

Technical Data

FME790

Length

1120

Length with bars extended

mm 2148

Height

mm 994

Maximum working load

kg 185

Weight

kg 14.3

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you nd one day that your Stanley product needs

replacement, or if it is of no further use to you, do not dispose

of it with household waste. Make this product available for

separate collection.

Separate collection of used products and

packaging allows materials to be recycled and

used again. Re-use of recycled materials helps

prevent environmental pollution and reduces

the demand for raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Stanley Fat Max provides a facility for the collection and

recycling of Stanley Fat Max products once they have reached

the end of their working life. To take advantage of this service

please return your product to any authorised repair agent who

will collect them on our behalf.

You can check the location of your nearest authorised repair

agent by contacting your local Stanley Fat Max ofce at the

address indicated in this manual. Alternatively, a list of

authorised Stanley Fat Max repair agents and full details of

our after-sales service and contacts are available on the

Internet at: www.2helpU.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley FME790 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info