Bedienungsanleitung Stanley SCD12 (Seite 13 von 14) (Englisch, Französisch, Portugiesisch, Türkisch)

720471

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

ENGLISH

SPECIFICATION

SCD12

Technical data

Voltage V

10.8

No-load speed:

1st gear min

-1

0–400

2nd gear min

-1

0–1500

Max torque Nm 26

Power output (MWO) W 180

Chuck capacity mm 10

Maximum drilling capacity:

Wood mm 20

Meta mm 10

CHARGER SC121

Input Voltage V

220-240

Output Voltage V

Output Current(DC) A 1.25

Approx. charge time min 70(1.5Ah)

Battery SB12S

Voltage V

10.8

Capacity Ah 1.5

Type Li-Ion

LEVEL OF SOUND PRESSURE ACCORDING TO EN

60745:

Sound pressure (LpA) 65.0 dB(A), uncertainty (K) 3 dB(A)

Sound power (LWA) 76.0 dB(A), uncertainty (K) 3 dB(A)

VIBRATION TOTAL VALUES (TRIAX VECTOR SUM)

ACCORDING TO EN 60745:

Screwdriving (ah, S) 0.9 m/s

, uncertainty (K) 1.5 m/s

Drilling into metal (ah, D) 1.1m/s

, uncertainty (K) 1.5 m/s

VIBRATION

The declared vibration emission values stated in the technical

data and the declaration of conformity have been measured

in accordance with a standard test method provided by EN

60745 and may be used for comparing one tool with another.

The declared vibration emission value may also be used in a

preliminary assessment of exposure.

WARNING! The vibration emission value during actual use of

the power tool can differ from the declared value depending

on the ways in which the tool is used. The vibration level may

increase above the

level stated.

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons regularly

using power tools in employment, an estimation of vibration

exposure should consider, the actual conditions of use and the

way the tool is used, including taking account of all parts of the

operating cycle such as the times when the tool is switched off

and when it is running idle in addition to the trigger time.

SERVICE INFORMATION

STANLEY offers a full network of company-owned and

authorized service locations. All STANLEY Service Centers

are staffed with trained personnel to provide

customers with

efficient and reliable power tool service. For more information

about our authorized service centers and if you need technical

advice, repair, or genuine factory replacement parts, contact the

STANLEY location nearest you.

TWO YEARS WARRANTY

If your STANLEY product becomes defective due to faulty

materials or workmanship within 24 months from the date of

purchase, STANLEY guarantees to replace all defective parts

free of charge or – at our discretion – replace the unit free of

charge provided that:

• The product has not been misused and has been used in

accordance with the instruction manual.

• The p

roduct has been subject to fair wear and tear;

• Repairs have not been attempted by unauthorised persons;

• Proof of purchase is produced;

• The STANLEY product is returned complete with all original

components.

If you wish to make a claim, contact your seller or check the

location of your nearest authorised STANLEY repair agent in

the STANLEY catalogue or contact your local STANLEY office

at the address indicated in this manual. A list of authorised

STANLEY repair agents and full details of our after sales

service is available on the internet at:

www.2helpU.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley SCD12 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info