Bedienungsanleitung Stanley SCD121 (Seite 6 von 64) (Englisch, Französisch, Türkisch)

720470

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISH (Original Instructions)

IMORTANT SAFETY INSTRUCTIONS FOR ALL

BATTERY CHARGERS

Save these instructions: This manual contains important

safety and operating instructions for SC122 battery charger.

• Before using charger, read all instructions and

cautionary markings on charger, battery pack, and

product using battery pack.

WARNING: Shock hazard. Do not allow any

liquid to get inside charger. Electric shock may

result.

CAUTION: Burn hazard. To reduce the risk

of injury, charge only STANLEY rechargeable

batteries. Other types of batteries may burst

causing personal injury and damage.

CAUTION: Children should be supervised to

ensure that they do not play with the appliance.

NOTICE: Under certain conditions, with the charger plugged

in to the power supply, the charger can be shorted by foreign

material. Foreign materials of a conductive nature such as,

but not limited to, grinding dust, metal chips, steel wool,

aluminum foil, or any buildup of metallic particles should be

kept away from charger cavities. Always unplug the charger

from the power supply when there is no battery pack in the

cavity. Unplug charger before attempting to clean.

• DO NOT attempt to charge the battery pack with any

chargers other than the ones in this manual. The

charger and battery pack are specifically designed to

work together.

• These chargers are not intended for any uses other

than charging STANLEY rechargeable batteries. Any

other uses may result in risk of fire, electric shock or

electrocution.

• Do not expose charger to rain or snow.

• Pull by plug rather than cord when disconnecting

charger. This will reduce risk of damage to electric plug

and cord.

• Make sure that cord is located so that it will not be

stepped on, tripped over, or otherwise subjected to

damage or stress.

• Do not use an extension cord unless it is absolutely

necessary. Use of improper extension cord could result

in risk of fire, electric shock, or electrocution.

• Do not place any object on top of charger or place

the charger on a soft surface that might block the

ventilation slots and result in excessive internal

heat. Place the charger in a position away from any

heat source. The charger is ventilated through slots in

the top and the bottom of the housing.

• Do not operate charger with damaged cord or plug

— have them replaced immediately.

• Do not operate charger if it has received a sharp

blow, been dropped, or otherwise damaged in any

way. Take it to an authorised service centre.

• Do not disassemble charger; take it to an authorised

service centre when service or repair is required.

Incorrect reassembly may result in a risk of electric

shock, electrocution or fire.

• In case of damaged power supply cord the supply cord

must be replaced immediately by the manufacturer, its

service agent or similar qualified person to prevent any

hazard.

• Disconnect the charger from the outlet before

attempting any cleaning. This will reduce the risk

of electric shock. Removing the battery pack will not

reduce this risk.

• NEVER attempt to connect 2 chargers together.

• The charger is designed to operate on standard

household electrical power. Do not attempt to use

it on any other voltage. This does not apply to the

vehicular charger.

Charger

The SC122 charger accept 12V Max / 10.8V Li- Ion

batteries. The charger require no adjustment and are

designed to be as easy as possible to operate.

LABELS ON TOOL

The following symbols are shown on the tool along with the

date code:

WARNING! To reduce the risk of injury, the user

must read the instruction manual.

Always wear safety goggles

Always wear safety hearing protection

Position of date code

The Date Code, which also includes the year of manufacture,

is printed into the housing.

Example:

2017 XX JN

Year of manufacturing

PACKAGE CONTAINS

The package contains:

1 Drill/driver

1 Charger

2 Batteries (S2) or 1 Battery (S1)

1 Instruction manual

• Check for damage to the tool, parts or accessories

which may have occurred during transport.

• Take the time to thoroughly read and understand this

manual prior to operation.

FEATURES (FIG A)

This appliance includes some or all of the following features.

1. Trigger switch

2. Forward/reverse button

3. Torque adjustment collar

4 Gear shifter

5. Keyless chuck

6. Battery release button

7. Battery pack

8. LED worklight

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley SCD121 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info