Bedienungsanleitung Stanley SCS4 (Seite 4 von 31) (Englisch, Französisch)

720799

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

ENGLISH (Original Instructions)

4. Power Tool Use And Care

a. Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

b. Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

c. Disconnect the plug from the power source and/or

remove the battery, if detachable from the power

tool before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting

the power tool accidentally.

d. Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool. Power tools are dangerous in the hands

of untrained users.

e. Maintain power tools and accessories. Check

for misalignment or binding of moving parts,

breakage of parts and any other condition that

may affect the power tool’s operation. If damaged,

have the power tool repaired before use. Many

accidents are caused by poorly maintained power

tools.

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

different from those intended could result in a

hazardous situation.

h. Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

5. Battery tool use and care

a. Recharge only with the charger specied by the

manufacturer. A charger A charger that is suitable for

one type of battery may create a risk of re when used

with another battery.

b. Usepowertoolsonly withspecically designated

Battery. Use of any other Battery may create a risk of

injury and re.

c. When battery is not in use, keep it away from other

metal objects like paper clips, coins, keys, nails,

screws or other small metal objects that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause burns or a re.

d. Under abusive conditions, liquid may be ejected from

the battery, avoid contact. If contact accidentally

occurs, ush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from the

battery may cause irritation or burns.

e. Do not use a battery pack or tool that is damaged or

modied. Damaged or modied batteries may exhibit

unpredictable behavior resulting in re, explosion or risk

of injury.

f. Donotexposeabatterypackortooltoreorexcessive

temperature. Exposure to re or temperature above

130°C may cause explosion.

g. Follow all charging instructions and do not charge

the battery pack or tool outside the temperature range

speciedintheinstructions. Charging improperly or

at temperatures outside the specied range may damage

the battery and increase the risk of re.

6. Service

a. Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power tool

is maintained.

b. Never service damaged battery packs. Service of

battery packs should only be performed by the

manufacturer or authorized service providers

ADDITIONAL SAFETY INSTRUCTIONS

Safety Warnings Specific for Screwdriver

a. Hold the power tool by insulated gripping surfaces,

when performing an operation where the fastener

may contact hidden wiring or its own cord. Fasteners

contacting a “live” wire may make exposed metal parts

of the power tool “live” and could give the operator an

electric shock.

ADDITIONAL SPECIFIC SAFETY RULES

a. Always use eye protection. All users and bystanders

must wear eye protection that conforms to ANSI Z87.1.

b. Clean out your tool often, especially after heavy

use. Dust and grit containing metal particles often

accumulate on interior surfaces and could create an

electric shock hazard.

c. Do not operate this tool for long periods of time.

Vibration caused by the operating action of this tool

may cause permanent injury to fingers, hands and

arms. Use gloves to provide extra cushion, take

frequent rest periods and limit daily time of use.

d. Air vents often cover moving parts and should be

avoided. Loose clothes, jewelry or long hair can be

caught in moving parts.

e. Air vents often cover moving parts and should be

avoided. Loose clothes, jewelry or long hair can be

caught in moving parts.

WARNING: ALWAYS use safety glasses.

Everyday eyeglasses are NOT safety glasses.

Also use face or dust if cutting operation is dusty.

ALWAYS WEAR CERTIFIED SAFETY

EQUIPMENT.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley SCS4 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info