Bedienungsanleitung Stanley SFMCD711 (Seite 8 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

720423

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ENGLISH

(Original instructions)

Warning! Do not charge the battery at ambient

temperatures below 10 °C or above 40 °C.

Recommended charging temperature: approx. 24 °C.

Note: The charger will not charge a battery if the cell

temperature is below approximately 10 °C or above 40 °C.

The battery should be left in the charger and the

charger will begin to charge automatically when the cell

temperature warms up or cools down.

Note: To ensure maximum performance and life of lithium-ion

battery packs, charge the battery pack fully before rst use.

● Plug the charger (9) into an appropriate outlet before

inserting battery pack (6).

● The green charging light (9a) will blink continuously

indicating that the charging process has started.

● The completion of charge will be indicated by the green

charging light (9a) remaining ON continuously. The battery

pack (6) is fully charged and may be removed and used at

this time or left in the charger (9).

● Charge discharged batteries within 1 week. Battery life will

be greatly diminished if stored in a discharged state.

Charger LED Modes

Charging:

Green LED Intermittent

Fully Charged:

Green LED Solid

Hot/Cold Pack Delay:

Green LED Intermittent

Red LED Solid

Note: The compatible charger(s) will not charge a faulty

battery pack. The charger will indicate a faulty battery pack by

refusing to light.

Note: This could also mean a problem with a charger. If the

charger indicates a problem, take the charger and battery

pack to be tested at an authorized service centre.

Leaving the battery in the charger

The charger and battery pack can be left connected with the

LED glowing indenitely. The charger will keep the battery

pack fresh and fully charged.

Hot/Cold Pack Delay

When the charger detects a battery that is too hot or too

cold, it automatically starts a Hot/Cold Pack Delay, the green

LED (9a) will ash intermittently, while the red LED (9b) will

remain on continuously, suspending charging until the battery

has reached an appropriate temperature. The charger then

automatically switches to the pack charging mode. This

feature ensures maximum battery life.

Battery state of charge indicator (Fig. B)

The battery includes a state of charge indicator to quickly

determine the extent of battery life as shown in gure B. By

pressing the state of charge button (6a) you can easily view

the charge remaining in the battery as illustrated in gure B.

Installing and Removing the Battery Pack from

the tool

Warning! Make certain the lock-off button is engaged

to prevent switch actuation before removing or

installing battery.

To install battery pack (Fig. C)

● Insert battery pack rmly into tool until an audible click is

heard as shown in gure C. Ensure battery pack is fully

seated and fully latched into position.

To remove battery pack (Fig. D)

● Depress the battery release button (7) as shown in gure

D and pull battery pack out of tool.

Belt hook (Optional extra) (Fig. E, F)

Warning! To reduce the risk of serious personal

injury, place the forward/reverse button in the lock-off

position or turn tool off and disconnect battery pack

before making any adjustments or removing/installing

attachments or accessories. An accidental start-up

can cause injury.

Warning! To reduce the risk of serious personal

injury, ONLY use the tool’s belt hook (10) to hang the

tool from a work belt. DO NOT use the belt hook (10)

for tethering or securing the tool to a person or object

during use. DO NOT suspend tool overhead or

suspend objects from the belt hook.

Warning! To reduce the risk of serious personal

injury, ensure the screw (11) holding the belt hook

is secure.

Note: When attaching or replacing the belt hook (10), use only

the screw (11) that is provided. Be sure to securely tighten

the screw.

The belt hook (10) can be be attached to either side of the tool

using only the screw (11) provided, to accommodate left- or

right- handed users. If the hook is not desired at all, it can be

removed from the tool.

To move the belt hook, remove the screw (11) that holds the

belt hook (10) in place then reassemble on the opposite side.

Be sure to securely tighten the screw (11).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley SFMCD711 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info