Bedienungsanleitung Stanley SFMCSTB963 (Seite 13 von 136) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

720562

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

ENGLISH

subject to variation based on product components, temperature

and end-userapplication.

Assembling the Guard (Fig.D, E)



WARNING: Never remove the guard. Damage

or personal injury couldresult.



WARNING: NEVER OPERATE APPLIANCE

WITHOUT GUARD FIRMLY IN PLACE. The guard must

always be properly attached on the appliance to protect

theuser.

1. Assemble the guard

8

to the motor housing

5

2. Using a crosshead screwdriver, insert the 4 guard screws and

tightensecurely.

An extended coverage guard is available (sold separately) for

extra coverage if desired. Use STANLEYFATMAX replacement

guard.

Assembling the Pole (Fig.C–E)

1. Do not remove the zip tie until the pole isassembled.

2. Ensure that the sleeve

14

on the lower trimmer

pole

6

is fully extended.

NOTE: To adjust the sleeve, release the sleeve latch

15

and

move the sleeve intoposition.

3. Lock the sleeve latch.

4. With the sleeve latch closed, slide the upper trimmer pole

into the sleeve lower trimmer pole. The latching button

17

will click into position when it engages the latchhole.

5. Tighten the top screw

18

with a crossheadscrewdriver.

Attaching the Auxiliary Handle (Fig.F)

1. Place the auxiliary handle

4

onto the top of the upper

trimmer pole

6

as shown in FigureF.

2. Slide the bracket

31

of the auxiliary handle onto the

bottom of thehandle.

3. Thread the handle bolts

32

through the handle and into

the bracket fromabove.

4. Tighten the handle bolts. Ensure the handle is securely

attached by closing the handle clamp

19

5. To adjust the position of the auxiliary handle, open the

handle clamp and slide the handle up and down the pole

until it is in the desired location. Close the clamp to lock the

handle inplace.

Height Adjustment (Fig.E)



CAUTION: Adjust the length of the trimmer to

obtain proper workingpositions.

1. The overall height of the trimmer can be adjusted by

loosening the height-adjust collar

6

by rotating it in the

direction of the arrow shown in Figure E.

2. Move the upper housing straight up or down. When the

desired height is achieved, tighten the collar by rotating it

opposite of the direction shown in FigureE.

Releasing the Cutting Line (Fig.A)

In transit, the cutting line is taped to the spool housing

10

• Remove the tape holding the cutting line to the

spoolhousing.

OPERATION

Instructions for Use



WARNING: Always observe the safety

instructions and applicableregulations.



WARNING: To reduce the risk of serious

personal injury, turn tool off and disconnect battery

pack before making any adjustments or removing/

installing attachments or accessories. An accidental

start-up can causeinjury.

Proper Hand Position (Fig.A, I)



WARNING: To reduce the risk of serious

personal injury, ALWAYS use proper hand position

asshown.



WARNING: To reduce the risk of serious

personal injury, ALWAYS hold securely in anticipation of a

suddenreaction.

Proper hand position requires one hand on the main

handle

13

and one hand on the auxiliary handle

4

Switching Trimmer On and Off (Fig.A)

To turn the appliance on, squeeze the lock-off lever

2

and then

the variable speed trigger

1

. Once the unit is running, you may

release the lock off lever. To turn the appliance off, release the

variable speedtrigger.



WARNING: Never attempt to lock the trigger

in the onposition.

Speed Control Switch (Fig.A)

This string trimmer gives you the choice to operate at a

more efficient speed to extend the runtime for larger jobs, or

accelerate the trimmer speed for high-performancecutting.

To extend runtime, pull the speed control switch back toward

the battery housing

10

into the "LO" position. This mode is best

for larger projects that require more time tocomplete.

To accelerate the trimmer, push the speed control switch

3

forward toward the auxillary handle

4

into the "HI" position.

This mode is best to cut through heavier growth and for

applications that need higherRPM.

NOTE: When in "HI" mode, runtime will be decreased as

compared to when trimmer is in "LO"mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley SFMCSTB963 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info