Bedienungsanleitung Stanley SFMCSTB963 (Seite 15 von 136) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

720562

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

ENGLISH

Replacing Spool Assembly (Fig.O, P)

1. Rotate the spool housing

9

until the hole

24

in the

spindle plate aligns with notch

25

in the housing. Insert a

screwdriver through the notch and into the hole, to prevent

the spindle

26

fromturning.

2. Unscrew and remove the spool housing by turning the

spool grip cover

20

clockwise.

NOTE: Do not try to remove the spool housing by turning the

spool head

30

3. Remove spindle plate

27

before installing a new housing.

Remove any dirt and grass from the motor housing and

spindleplate.

4. Install spindle plate onto the spindle, so the double D

shaped retaining nut on the spindle sits inside the base of

the spindleplate.

5. Align the spindle plate hole and notch, insert a screwdriver

back into the hole and thread the new spool housing

counterclockwise. Securely tighten the new spool housing

onto thespindle.

Recommended accessories for use with your tool are available

at extra cost from your local dealer or authorized service center.

If you need assistance in locating any accessory, please visit our

website www.stanley.eu/3.

Use STANLEYFATMAX Model No.STZST1169.

Lubrication

Your power tool requires no additionallubrication.

Cleaning



WARNING: Blow dirt and dust out of the

main housing with dry air as often as dirt is seen collecting

in and around the air vents. Wear approved eye protection

and approved dust mask when performing thisprocedure.



WARNING: Never use solvents or other harsh

chemicals for cleaning the non-metallic parts of the

tool. These chemicals may weaken the materials used in

these parts. Use a cloth dampened only with water and

mild soap. Never let any liquid get inside the tool; never

immerse any part of the tool into aliquid.

Optional Accessories



WARNING: Since accessories, other than

those offered by STANLEYFATMAX, have not been tested

with this product, use of such accessories with this tool

could be hazardous. To reduce the risk of injury, only

STANLEYFATMAX recommended accessories should be

used with thisproduct.

Consult your dealer for further information on the

appropriateaccessories.

Protecting the Environment

Separate collection. Products and batteries marked

with this symbol must not be disposed of with normal

householdwaste.

Products and batteries contain materials that can

be recovered or recycled reducing the demand for raw

materials. Please recycle electrical products and batteries

according to local provisions. Further information is available at

www.2helpU.com.

Rechargeable Battery Pack

This long life battery pack must be recharged when it fails to

produce sufficient power on jobs which were easily done before.

At the end of its technical life, discard it with due care for our

environment:

• Run the battery pack down completely, then remove it from

thetool.

• Li-Ion cells are recyclable. Take them to your dealer or a

local recycling station. The collected battery packs will be

recycled or disposed ofproperly.

Guarantee

1 Year Guarantee

All STANLEY FATMAX power tool products include a 1 year

guarantee as standard. In the unlikely event that your powertool

becomes defective due to faulty materials or worksmanship

within 1 year of purchase, STANLEY guarantees to replace or

repair all defective parts free of charge, or – at our discretion –

replace the item free ofcharge.

3 Year Guarantee

of purchase and qualify for an additional 2 year guarantee.

Having registered your power tool, in the unlikely event that

your powertool becomes defective due to faulty materials or

worksmanship, STANLEY guarantees to replace or repair all

defective parts free of charge, or – at our discretion – replace the

item free ofcharge.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley SFMCSTB963 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info