Bedienungsanleitung Stanley SFMCV002 (Seite 6 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

722516

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

ENGLISH (Original instructions)

Warning! Do not charge the battery at ambient temperatures

below 10 °C or above 40 °C. Recommended charging

temperature: approx. 24 °C.

Note: The charger will not charge a battery if the cell

temperature is below approximately 10 °C or above 40 °C.

The battery should be left in the charger and the

charger will begin to charge automatically when the cell

temperature warms up or cools down.

Note: To ensure maximum performance and life of lithium-ion

battery packs, charge the battery pack fully before rst use.

u Plug the charger (14) into an appropriate outlet before

inserting battery pack (13).

u The green charging light (14a) will blink continuously

indicating that the charging process has started.

u The completion of charge will be indicated by the green

charging light (14a) remaining ON continuously. The

battery pack (13) is fully charged and may be removed

and used at this time or left in the charger (14).

u Charge discharged batteries within 1 week. Battery life will

be greatly diminished if stored in a discharged state.

Charger LED Modes

Charging:

Green LED Intermittent

Fully Charged:

Green LED Solid

Hot/Cold Pack Delay:

Green LED Intermittent

Red LED Solid

Note: The compatible charger(s) will not charge a faulty

battery pack. The charger will indicate a faulty battery pack by

refusing to light.

Note: This could also mean a problem with a charger. If the

charger indicates a problem, take the charger and battery

pack to be tested at an authorized service centre.

Leaving the battery in the charger

The charger and battery pack can be left connected with the

LED glowing indenitely. The charger will keep the battery

pack fresh and fully charged.

Hot/Cold Pack Delay

When the charger detects a battery that is too hot or too cold,

it automatically starts a Hot/Cold Pack Delay, the green LED

(14a) will ash intermittently, while the red LED (14b) will

remain on continuously, suspending charging until the battery

has reached an appropriate temperature.

The charger then automatically switches to the pack charging

mode. This feature ensures maximum battery life.

Battery state of charge indicator (Fig. B)

The battery includes a state of charge indicator to quickly

determine the extent of battery life as shown in gure B. By

pressing the state of charge button (13a) you can easily view

the charge remaining in the battery as illustrated in gure B.

Installing and Removing the Battery Pack (not

supplied) from the tool

To install battery pack (not supplied) (Fig. C)

u Insert battery pack rmly into tool until an audible click is

heard as shown in gure C. Ensure battery pack is fully

seated and fully latched into position.

To remove battery pack (not supplied) (Fig. C)

u Depress the battery release button (13b) as shown in

gure C and pull battery pack out of tool.

Attaching vacuum hose (Fig. D)

The vacuum hose (8) will need to be attached to the

vacuum before using the appliance.

u Place the vacuum on a at, rm surface.

u Unlatch tank latches (5) and remove power head from

the tank. Remove the hose (8) from the tank.

u Align the hose end (15) with the intake port (17) on the

front of the appliance, ensuring the hose alignment lock

(16) is aligned with the arrow (17) on the intake port.

u Insert the hose end into the intake port and twist

clockwise to lock in place.

u Replace power head onto the tank and secure latches.

Note: The power head will only t onto the tank when the

intake port on the front of the power head and the storage

area for the wide nozzle tool on the tank are aligned as

shown in gure D.

Correct hand position

Warning! To reduce the risk of serious personal injury,

ALWAYS hold securely in anticipation of a sudden reaction.

u Proper hand position requires one hand on the main

handle (2).

Use

On / Off Switch (Fig. E)

u Attach the appropriate accessory to the hose (8).

u Insert battery pack (not supplied).

u To turn vacuum on, press the I/O (on/off) button (1).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley SFMCV002 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info