Bedienungsanleitung Stanley SGM146 (Seite 7 von 28) (Englisch, Französisch)

720762

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

(Original instructions) ENGLISH

LABELS ON TOOL

In addition to the pictographs used in this manual, the labels

on the tool show the following pictographs:

Read instruction manual before use.

Wear safety glasses.

Wear ear protection.

Date Code Position (Fig. A)

The Date Code (16), which also includes the year of

manufacture, is printed into the housing.

Example:

2017 XX XX

Year of Manufacture Package Contents

THE PACKAGE CONTAINS

1 Angle grinder

1 Guard

1 Side handle

1 Flange set

1 Two-pin spanner

1 Instruction manual

• Check for damage to the tool, parts or accessories which

may have occurred during transport.

• Take the time to thoroughly read and understand this

manual prior to operation.

Description (Fig. A)

WARNING: Never modify the power tool or any

part of it. Damage or personal injury could result.

1 ON/OFF-switch

2 Lock button

3 Side handle

4 Guard

5 Spindle lock

ELECTRICAL SAFETY

Only one voltage is applicable to this tool. Be sure to check

that the power supply corresponds to the voltage on the rating

plate.

Your Stanley tool is equipped with double

insulation, hence, it does not require to be

earthed

When the power cord is damaged, have it sent to a STANLEY

service center for replacement to specially prepared cables.

USING AN EXTENSION CABLE

If an extension cable is required, use an approved 3–core

extension cable suitable for the power input of this tool (see

Technical Data).The minimum conductor size is 1.5 mm2; the

maximum length is 30 m.

When using a cable reel, always unwind the cable completely.

ASSEMBLY AND ADJUSTMENT

WARNING: To reduce the risk of serious personal

injury, turn tool off and disconnect tool from power

source before making any adjustments or

removing/installing attachments or accessories. Before

reconnecting the tool, depress and release the trigger switch

to ensure that the tool is off. An accidental start-up can cause

injury.

Attaching the Side Handle (Fig. F)

WARNING: Before using the tool, check that the

handle is tightened securely.

WARNING: The side handle should always be

used to maintain control of the tool at all times.

Screw the side handle (3) tightly into one of the

holes (15) on thrin side of the gear case.

Mounting and Removing the Guard

WARNING: Guards must be used with this

grinder.

Mounting (FIG. B & C)

• Place the angle grinder on a table, spindle up.

• Align the lug (6) with the slot (7) in the bracket.

• Press the guard (4) down and turn it in the direction of the

arrow (Fig. B).

Removing (FIG. B & C)

• Hold the tool in your hand.

• Loosen the screw 9 on the guard collar.

• Rotate the guard until the luglocates in the slot.

• Release the guard.

Attaching and Removing Grinding Wheels

(Fig. D, E)

Warning: Do not use damaged grinding wheels.

• Place the tool on a work bench, groove facing up.

• Attach the inner ﬂange(11) correctly on the output

shaft(12) Fig. D

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley SGM146 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info