Bedienungsanleitung Stanley SPS-900 (Seite 14 von 36) (Deutsch, Englisch)

720577

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

- Use a screwdriver, or the supplied Allen key to ﬁx the

shaft of the petrol cutting blade

at the intended location by a locknut (B9).

- Now screw the line cassette (13) onto the shaft in a

counter-clockwise direction (B9).

CAUTION: Left-handed Thread

Assembly of Cutting Blade (B10 - B13)

To avoid the risk of an unwanted engine start,

pull out the spark plug socket.

RISK OF INJURIES

CAUTION: Always wear protective

gloves when working with and

around cutting tools.

The cutting blade must be sharpened periodically

according to instructions. Improperly sharpened or blunt

cutting edges may cause the tool to overload.

RISK OF RUPTURES and CRACKS

Fragments hurled away from the cutting tool can

cause extremely severe injuries.

To use the petrol cutting blade as an

engine powered trimmer, the proper guard and

cutting blade must be attached.

- Use a screwdriver, or the supplied Allen key to ﬁx the

shaft of the petrol cutting blade

at the intended location by a locknut. Now remove the

line cassette (13) from the shaft by turning it in clockwise

direction (B10).

- Place the cutting blade (11) on the locking part.

- Place the retaining disk (observe side) and the lock

washer on the cutting blade (11) (B12).

- Use a screwdriver, or the supplied Allen key to ﬁx the

shaft of the petrol cutting blade

at the intended location by a locknut. Screw the

Handlebars

The design of the petrol brush cutter allows for

operation at the right side of the user's body.

Loosen the screw in the operating handle (3) and fasten

it on the handrail (2) (B2).

- Loosen the 4 hexagon socket screws of the handrail

holder (1) (B3-1 / 2) with the enclosed Allen key (14).

- Insert the handrail and lightly tighten the hexagon

socket screws (B3-3).

- Adjust the handrail (2) so that it is at an angle of

approx. 90 ° upwards. Tighten the hexagon socket

screws (B3-4).

Assembly of Line Cassette

To avoid the risk of an unwanted engine start, pull

out the spark plug.

RISK OF INJURIES

CAUTION: Always wear protective

gloves when working with and around

cutting tools.

The petrol cutting blade is supplied with attached

cutting blade (11) and associated guard (12).

To use the petrol cutting blade as grass trimmer,

proper guard (12) and line spool (13) must be

attached.

The cutting protection can be installed like pictures B4-1

and B4-2.

- Use a screwdriver (18), or the supplied Allen key (14)

to ﬁx the shaft of the petrol brush cutter at the intended

location (B5) by a locknut.

- Use the supplied hexagon wrench (15) to loosen

the hexagonal screw for attachment of the cutting blade

(B6) by turning it in clockwise direction.

- Remove the hexagonal screw, the lock washer,

and the retaining disk for the cutting blade (B7).

Keep these parts at a safe location.

- Attach the locking part (B8).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley SPS-900 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info