Bedienungsanleitung Stanley SS28 (Seite 6 von 44) (Englisch, Französisch, Türkisch)

720732

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

ENGLISH (Original Instructions)

b. Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

c. Disconnect the plug from the power source and/

or remove the battery pack, if detachable from

the power tool before making any adjustments,

changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of

starting the power tool accidentally.

d. Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool. Power tools are dangerous in the hands

of untrained users.

e. Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage

of parts and any other condition that may affect the

power tools operation. If damaged, have the power

tool repaired before use. Many accidents are caused

by poorly maintained power tools.

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into account

the working conditions and the work to be performed.

Use of the power tool for operations different from

those intended could result in a hazardous situation.

h. Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

5. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

ADDITIONAL SPECIFIC SAFETY RULES

WARNING! Safety Instructions for Sanders

a. Hold power tools by insulated gripping surfaces,

because the sanding surface may contact its

own cord. Cutting a “live” wire may make exposed

metal parts of the power tool “live” and could give the

opertator an electric shock.

b. Warning! Contact with or inhalation of dusts arising

from sanding applications may endanger the health

of the operator and possible bystanders. Wear a dust

mask specifically designed for protection against dust

and fumes and ensure that persons within or entering

the work area are also protected.

c. Thoroughly remove all dust after sanding.

d. Take special care when sanding paint which is possibly

lead based or when sanding some woods and metal

which may produce toxic dust:

- Do not let children or pregnant women enter the work

area.

- Do not eat, drink or smoke in the work area.

- Dispose of dust particles and any other debris safely.

Additional Safety Information

WARNING: We recommend the use of a residual

current device with a residual current rating of

30mA or less.

SAFETY OF OTHERS

• This tool is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the tool by a person responsible for

their safety.

• Children should be supervised to ensure that they do

not play with the appliance.

RESIDUAL RISKS

In spite of the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks cannot be avoided. These are:

– Impairment of hearing

– Risk of personal injury due flying particles.

– Risk of burns due to accessories becoming hot

during operation.

– Risk of personal injury due to prolonged use.

– Risk of dust from hazardous substances.

ELECTRICAL SAFETY

Your tool is double insulated; therefore no earth

wire is required. Always check that the main

voltage corresponds to the voltage on the rating

plate.

WARNING! If the power cord is damaged, it must

be replaced by the manufacturer, authorized

STANLEY Service Center or an equally qualified

person in order to avoid damage or injury. If the

power cord is replaced by an equally qualified

person, but not authorized by STANLEY, the

warranty will not be valid.

USING AN EXTENSION CABLE

If an extension cable is required, use an approved 3–core

extension cable suitable for the power input of this tool (see

Technical Data).The minimum conductor size is 1.5 mm2;

the maximum length is 30 m. When using a cable reel,

always unwind the cable completely.

Cable cross-sectional

area (mm

) Cable rated

current (Ampere)

Cable cross-sectional

area (mm

) Cable rated

current (Ampere)

0.75 6

1.00 10

1.50 15

2.50 20

4.00 25

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley SS28 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info