Bedienungsanleitung Stanley SS28 (Seite 8 von 44) (Englisch, Französisch, Türkisch)

720732

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

ENGLISH (Original Instructions)

• To switch the tool off, release the on/off switch. To

switch the tool off when in continuous operation, press

the on/off switch once more and release it.

Hints for optimum use (Figure. C)

• Do not exert too much pressure on the tool.

• Regularly check the condition of the sanding paper.

• Replace when necessary.

• It is better to sand along the grain of the wood.

• When sanding new layers of paint before applying

another layer, use extra fine grit.

• On very uneven surfaces, or when removing layers of

paint, start with a coarse grit. On other surfaces, start

with a medium grit. In both cases, gradually change to a

fine grit for a smooth finish.

• Consult your retailer for more information on available

accessories.

Residual risks

Additional residual risks may arise when using the tool

which may not be included in the enclosed safety warnings.

These risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks can not be avoided. These include:

• Injuries caused by touching any rotating/moving parts.

• Injuries caused when changing any parts, blades or

accessories.

• Injuries caused by prolonged use of a tool. When using

any tool for prolonged periods ensure you take regular

breaks.

• Impairment of hearing.

• Health hazards caused by breathing dust developed

when using your tool (example:- working with wood,

especially oak, beech and MDF.)

MAINTENANCE

Your STANLEY power tool has been designed to operate

over a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper

tool care and regular cleaning.

• Regularly clean the ventilation slots in your tool using a

soft brush or dry cloth.

• Regularly clean the motor housing using a damp cloth.

Do not use any abrasive or solvent-based cleaner.This

machine is not user-serviceable. If problems occur

contact an authorised repair agent.

Lubrication

Your power tool requires no additional lubrication.

Cleaning

WARNING: Blow dirt and dust out of the main

housing with dry air as often as dirt is seen

collecting in and around the air vents. Wear

approved eye protection and approved dust

mask when performing this procedure.

WARNING: Never use solvents or other harsh

chemicals for cleaning the non-metallic parts

of the tool. These chemicals may weaken the

materials used in these parts. Use a cloth

dampened only with water and mild soap. Never

let any liquid get inside the tool; never immerse any part

of the tool into a liquid. To maintain products SAFETY

and RELIABILITY, repair, carbon brush inspection and

replacement, any other maintenance or adjustment should

be performed by STANLEY Service Centers, always using

Stanley replacement parts.

OPTIONAL ACCESSORIES

WARNING: Since accessories, other than those

offered by STANLEY, have not been tested with

this product, use of such accessories with this

tool could be hazardous. To reduce the risk of

injury, only STANLEY, recommended accessories

should be used with this product.

Consult your dealer for further information on the

appropriate accessories.

PROTECTING THE ENVIRONMENT

Separate collection. This product must not be

disposed of with normal household waste.

Should you find one day that your STANLEY product

needs replacement, or if it is of no further use to you, do

not dispose of it with household waste. Make this product

available for separate collection.

STANLEY provides a facility for the collection

and recycling of STANLEY products once they

have reached the end of their working life. To

take advantage of this service please return your

product to any authorised repair agent who will

collect them on our behalf.

You can check the location of your nearest authorised

repair agent by contacting your local STANLEY office at

the address indicated in this manual. Alternatively, a list

of authorised STANLEY repair agents and full details of

our after-sales service and contacts are available on the

Internet at: www.2helpU.com.

NOTES

STANLEY’s policy is one of continuous improvement to

our products and as such, we reserve the right to change

product specifications without prior notice. Standard

equipment and accessories may vary by country. Product

specifications may differ by country. Complete product

range may not be available in all countries. Contact your

local STANLEY dealers for range availability

SERVICE INFORMATION

STANLEY offers a full network of company-owned and

authorized service locations. All STANLEY Service Centers

are staffed with trained personnel to provide customers

with efficient and reliable power tool service. For more

information about our authorized service centers and

if you need technical advice, repair, or genuine factory

replacement parts, contact the STANLEY location nearest

you.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley SS28 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info