Bedienungsanleitung Stanley SS28 (Seite 9 von 44) (Englisch, Französisch, Türkisch)

720732

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

(Original Instructions) ENGLISH

TECHNICAL DATA

SS28

Voltage V

220~240

Frequency Hz 50/60

Power input W 280

Orbits (no load) min

-1

14000

Sanding base surface mm 91x185

Weight kg 1.5

Level of sound pressure according to EN 60745:

Sound pressure (L

) dB(A) 81.5

Sound pressure uncertainty (K

) dB(A) 3

Sound power (L

) dB(A) 92.5

Sound power uncertainty (K

) dB(A) 3

Vibration emission value ah:

(ah) = m/s

7.4

Uncertainty (K) = m/s

1.5

VIBRATION

The declared vibration emission values stated in the

technical data and the declaration of conformity have been

measured in accordance with a standard test method

provided by EN 60745 and may be used for comparing one

tool with another. The declared vibration emission value

may also be used in a preliminary assessment of exposure.

WARNING! The vibration emission value during

actual use of the power tool can differ from the

declared value depending on the ways in which

the tool is used. The vibration level may increase

above the level stated.

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons

regularly using power tools in employment, an estimation of

vibration exposure should consider, the actual conditions of

use and the way the tool is used, including taking account

of all parts of the operating cycle such as the times when

the tool is switched off and when it is running idle in addition

to the trigger time.

EC declaration of conformity

MACHINERY DIRECTIVE

SS28 - Sheet Sander

STANLEY declares that these products described under

“technical data” are in compliance with: 2006/42/EC, EN

62841-1: 2015, EN 62841-2-4: 2014.

These products alsoV comply with Directive 2014/30/EU

and 2011/65/EU. For more information, please contact

STANLEY at the following address or refer to the back of

the manual.

The undersigned is responsible for compilation of the

technical file and makes this declaration on behalf of

STANLEY.

R.Laverick

Engineering Manager

STANLEY , Europe, Egide Walschaertsstraat14-18,

2800 Mechelen, Belgium

06.2018

TWO YEAR WARRANTY

If your STANLEY product becomes defective due to faulty

materials or workmanship within 24 months from the date

of purchase, STANLEY guarantees to replace all defective

parts

free of charge or – at our discretion – replace the unit free of

charge provided that:

• The product has not been misused and has been used

in accordance with the instruction manual;

• The product has been subject to fair wear and tear;

• Repairs have not been attempted by unauthorized

persons;

• Proof of purchase is produced;

• The STANLEY product is returned complete with all

original components;

• The product hasn’t been used for hire purposes.

If you wish to make a claim, contact your seller or check

the location of your nearest authorised STANLEY repair

agent in the STANLEY catalogue or contact your local

STANLEY office at the address indicated in this manual. A

list of authorised STANLEY repair agents and full details

of our after sales service is available on the internet at:

www.2helpU.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley SS28 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info