Bedienungsanleitung Starkwerk SW 4700 (Seite 15 von 24) (Deutsch, Englisch)

781907

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

The operators

Healthy commonsense and caution are factors that can-

not be integrated in a machine. These factors are the

responsibility of the operator. Please consider the follow-

ing:

Prevent body contact with grounded surfaces such as

pipes and radiators. Please be watchful. Do not work at

the machine if you are tired.

Always wear:

• ANSI- approved dust masks.

• Safety glasses

• Hearing protection.

Do not stretch yourself over running machines.

ADDITIONAL INSTRUCTIONS

FOR LEAKAGE CURRENT CIRCUIT-BREAKER.

Please observe the following important instructions on

start-up and handling.

Pay attention to the instructions even if you hand over

the

product to a third party. Preserve this operating Instruc-

tions

manual for subsequent reference.

SAFETY INSTRUCTIONS!

• Arbitrary alteration and/or modication of the product

is not allowed for safety- and approval reasons (CE).

Never dismantle the product.

• The product is not suitable for handling by children.

Children cannot assess the risks involved in handling

electrical devices. Therefore, pay special attention to

the presence of children.

• The structure of the product corresponds to Protec-

tion Class 1. Only a proper mains socket with an earth

wire (230V~/50Hz) of the public power supply should

be used.

• In industrial equipment, the Accident Prevention Spec-

ications of the Federation of Trade Associations for

Electrical Systems and Resources must be observed.

• In schools, training centres, hobby- and self-help work-

shops, the operation of the product must be monitored

responsibly by trained staff.

• Handle the product carefully. Impacts, hits and drops

from even low heights can damage the machine.

• Never use the product if it is brought from a cold to a

hot room. Under certain circumstances, the resulting

condensed water can destroy the product.

• Let the product come to the room temperature, before

connecting it to the mains power supply. Under certain

circumstances, this can take several hours.

• Do not hold the product with moist or wet hands.

• Ensure that the Insulation of the entire product is nei-

ther damaged nor destroyed.

• If the product is not operated over long periods, dis-

connect it from the mains power supply, pull the plug

out of the socket.

• Avoid the following environmental conditions at the in-

stallation site or during transport.

• Wetness or very high humidity. Extreme cold. Dust or

combustible gases, vapours or solvents. Strong vibra-

tions.

• Strong magnetic elds as in the vicinity of machines or

loudspeakers.

m Proper use

The machine corresponds to the valid EU Machine

Directive

• Before starting work, all the protection- and safety de-

vices must be installed on the machine.

• The machine is designed for operation by one person.

The operator will be responsible for the presence of

third persons in the work area.

• Observe all safety- and danger instructions on the

machine.

• Keep all safety and danger instructions near the ma-

chine in complete and readable form.

• The machine is designed exclusively for cutting small

and medium-sized tiles (glazed, ceramic or similar

tiles) with the offered tool and accessories. Cutting of

metal and wood is not allowed.

• The dimensions of the workpieces to be machined

should not exceed or fall below the specied maximum

and minimum dimensions.

• Please use the machine only if it is in a technically

fault-free condition. Use It properly, conscious of the

involved safety and risk factors and giving due con-

sideration to the operating instructions manual! Faults,

especially those that can affect safety must be recti-

ed immediately!

• The safety-, workplace- and maintenance specica-

tions of the manufacturer as well as the dimensions

specied in the technical data must be observed.

• The applicable accident prevention measures and the

other generally recognized technical safety rules must

be observed.

• The machine must be used, serviced or repaired only

by persons who are familiar with it and who have been

briefed about its risks. Arbitrary alterations to the ma-

chine will make the liability of the manufacturer for

damages resulting there from null and void.

• The machine may be used only with original accesso-

ries and original tools of the manufacturer.

Despite proper use, certain residual risk factors cannot

be eliminated fully. The following things can occur, de-

pending on the design and structure of the machine:

• Intervention in the running diamond cutting disc.

• Contact with the diamond cutting disc in exposed area.

• Ejection of work pieces and work piece components.

• Ejection of a faulty diamond attachment in the cut-

ting disc.

• Hearing damage due to non-use of the required hear-

ing protection.

• Injuries to the eyes due to non-use of eye protection

Any use beyond the one specied will be treated as im-

proper. The manufacturer will not be liable for damages

resulting from such improper use; the risk will be borne

by the user alone.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Starkwerk SW 4700 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info