593154
11
Zoom out
Zoom in
Vorherige Seite
1/43
Nächste Seite
- 20 - - 21 -
How it works / Basic function
The ultrasonic and DualTech
presence detectors from the
Control PRO range control light-
ing as well as heating, ventila-
tion and air-conditioning (COM 2
only), e.g. in offices, schools,
public buildings or at home, in
relation to ambient light level
and the presence of persons.
The presence detector's switch-
ing outputs and reach are set at
the potentiometers and dip
switches or by using the option-
al remote control.
Presence Control has a low in-
trinsic power consumption.
Presence Control PRO
US 360 COM1
Single US COM1
DualTech COM1
Dual US COM1
1 switching output operating in
relation to light-level setting and
presence of persons.
Settings:
- Light-level setting
- Stay-ON time, pulse mode,
IQ mode
Presence Control PRO
US 360 COM2
Single US COM2
DualTech COM2
Dual US COM2
1 switching output as COM 1.
An additional 2nd switching out-
put for operating HVAC (heating/
ventilation/air-conditioning) in re-
lation to the presence of persons.
Settings:
- Stay-ON time
- Switch-ON delay
- Room surveillance
Presence Control PRO
US 360 DIM
Single US DIM
DualTech DIM
Dual US DIM
1 switching output operating in
relation to light-level setting and
presence of persons.
Settings:
- Light-level setting
- Stay-ON time, IQ mode
- Orientation light
- Constant-lighting control
Detection zone
DualTech/US 360, mounting height 2.8 m Single US/Dual US, mounting height 2.8 m
Single US
Dual US
PIR radial & presence detection
PIR tangential detection
US tangential & presence detection
US radial detection of substantial movements
US tangential & presence detection
US radial detection of substantial movements
DualTech
US 360
Electrical installation/Automatic mode
In selecting the wiring leads, it is
important to meet the wiring
regulations laid down in VDE
0100 (see Safety warnings on
page 10). Wiring up the pres-
ence detector: Under section 6 of
VDE 0100 520, a multiple-core
lead containing both the mains
voltage leads and the control
leads (e.g. NYM 5 x 1.52) may be
used for the wiring between sen-
sor and electronic ballast. The
mains connection lead must be
no greater than 10 mm in diame-
ter. The mains connection termi-
nal accepts 2 x 2.5 mm
2
cables.
When installing the surface-
mounting version, connect a
circuit breaker (16 A) on the line
side.
PSN
LL'
L
N
P
L
N
PSN
LL'
L
N
L
N
1-10V
1-10V
+
max. 100 mA
COM1
DIM
PSN
LL'
L
N
P
L
N
PSN
LL'
L
N
L
N
1-10V
1-10V
+
max. 100 mA
COM1
DIM
PSN
LL'
L
N
P
L
N
PSN
LL'
L
N
L
N
1-10V
1-10V
+
max. 100 mA
COM1
DIM
PSN
LL'
L
N
P
L
N
PSN
LL'
L
N
L
N
1-10V
1-10V
+
max. 100 mA
COM1
DIM
DIMCOM 1 COM 2
GB
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Steinel DualTech wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info