Bedienungsanleitung Steinel DualTech (Seite 13 von 43) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch, Schwedisch)

593154

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

- 24 - - 25 -

DIP 6 / 7 / 8

Trigger mode

The trigger mode enables the user to choose which sensing technologies should be used

to initially turn the load on and which technologies are required to keep it on. The following

settings are possible:

DualTech COM1 / COM2 / DIM

Both: Requires movement recognition by PIR and US

Either: Requires movement recognition by PIR or US

PIR: Requires movement recognition by PIR

US: Requires movement recognition by US

Inital occupancy:

Sensor technology used to turn the load on (PIR, US, Both, Either)

Maintain Occupancy:

Sensor technology used to keep the load on after initial occupancy (PIR, US, Both, Either)

The trigger mode is selected by DIP switches 6, 7 and 8.

1 2 3 4 5 6 7 8

TEST

MODE

MANUAL

ON / OFF

CONST.

OFF

NORMAL

MODE

AUTO

CONST.

TRIGGER MODE

Trigger mode

options n

Initial presence

Maintain

presence:

DIP

Option 1 Both Either OFF OFF OFF

Option 2 Both Both OFF OFF ON

Option 3 PIR Either OFF ON OFF

Option 4 US Either OFF ON ON

Option 5 (factory setting) Either Either ON OFF OFF

Option 6 US US ON OFF ON

Option 7 PIR PIR ON ON OFF

Option 8 Either Both ON ON ON

Functions – Settings by potentiometer

Examples of use Light-level settings

Night-time mode min

Corridors, foyers 1

Stairs, escalators, moving walkways 2

Washrooms, toilets, switchrooms, canteens 3

Sales ﬂoor, kindergartens, nursery school rooms,

sports halls

Work rooms: oﬃces, conference and meeting

rooms, precision assembly activities, kitchens

Working areas requiring good light:

Laboratory, technical drawing, precision work

>=6

Daylight mode max

Stay-ON time for switching

output 1

Setting 30 sec. – 30 min.

The chosen stay-ON time is in-

finitely variable from a minimum

of approx. 30 sec. to a maximum

of 30 min. Intrinsic light is cali-

brated after 3 min. When the

threshold is exceeded, the sensor

switches OFF after the stay-ON

time expires.

Time setting

If the dial is set to (fully an-

ti-clockwise), the unit is in pulse

mode, i.e. the output is switched

ON for approx. 2 sec. (e.g. for stair-

well lighting timer). Afterwards,

the sensor does not react to move-

ment for approx. 8 sec. Day mode

is the only mode possible here be-

cause of dazzle by light from exter-

nal sources.

Turned fully clockwise: The stay-

ON time is self-learning and ad-

justs dynamically to user behav-

iour.

The optimum time cycle is deter-

mined by means of a learning al-

gorithm.

The shortest time is 5 min., the

longest 20 min.

Pulse mode (except DIM)

IQ-Modus

The chosen response threshold

can be infinitely varied from ap-

prox. 10 – 1000 lux.

Control dial turned fully clockwise:

MAX daylight mode

Control dial turned fully

anti-clockwise: MIN night mode

Depending on the site of installa-

tion, the setting may need to be

corrected by 1-2 marks on the

scale.

Twilight setting

Potentiometer e

Potentiometer f

COM 1 + COM 2

Note: Depending on the site of installation, the setting may need to be corrected by 1 – 2 marks on the scale.

The light level is measured at the sensor.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Steinel DualTech Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info