Bedienungsanleitung Stevens E-Bike (Seite 10 von 21) (Englisch)

780335

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

S - 18 | English English | S - 19

Caution:

The weight distribution on STEVENS pedelecs differs considerably from the weight

distribution on bicycles without drive assistance. A STEVENS pedelec is markedly

heavier than a bicycle without drive assistance. For this reason pushing, lifting and

carrying the STEVENS pedelec is more difﬁcult. Bear this in mind when loading your

pedelec into a car and unloading it or when mounting it on a bicycle carrier system.

Caution:

STEVENS pedelecs are approved for towing trailers up to 40 kg (88.2 lbs) trailing

load (towed load). STEVENS advises you to use only trailers with brakes. For full

suspension STEVENS E-mountain bikes made of aluminium the use of trailers is

permitted. For full suspension STEVENS E-mountain bikes made of carbon the use

of trailers is not permitted.. If you are in doubt or if you have any questions, contact

your STEVENS dealer.

Caution:

Note that not all STEVENS pedelecs are ﬁtted with kickstands. Therefore, when

parking your STEVENS pedelec, make sure it stands safe and secure and is not at

risk of toppling over or being knocked over. If your STEVENS pedelec topples over, it

can suffer from damage.

10. If you have bought a STEVENS pedelec with suspension fork, you should ask

your STEVENS dealer to have it properly adjusted before delivery. Improperly

adjusted suspension forks are liable to malfunction or damage to the suspension

components. In any case they will impair the performance of your pedelec as

well as your safety and joy whilst cycling.

For more information read chapter “Suspension Forks” of your general STEVENS

user manual and the operating instructions on the enclosed CD-ROM.

Danger:

When mounting your STEVENS pedelec, make sure not to step in the pedals until

you sit in the saddle and gripping the handlebars tight. The drive assistance might

switch on suddenly and result in an uncontrolled start of your STEVENS pedelec. Risk

of falling!

Danger:

Be aware that the

distance you need to

stop your pedelec may

increase, when you are

riding with your hands

on bar ends. The brake

levers are not in all

gripping positions within

easy reach.

Danger:

A lack of practice when

using clipless pedals or

too much spring tension

in the mechanism can

lead to a very ﬁrm

connection, from which

you cannot quickly step

out. Risk of falling!

Caution:

Your STEVENS pedelec is

approved in principle for

mounting a child seat!

Your STEVENS dealer will

be pleased to recom-

mend and assemble you

suitable models for your

STEVENS pedelec.

Before Every Ride

Your STEVENS pedelec has undergone numerous tests during production and a

ﬁnal check has been carried out by your STEVENS dealer. Nevertheless, be sure to

check the following points before every ride to exclude any malfunctioning that may

be due to the transport of your STEVENS pedelec or to the work a third person may

have performed on your STEVENS pedelec before delivery:

1. Are the quick-release levers or the bolted connections of the front and rear

wheel, the seat post and other components properly closed and tightened?

For more information read chapter “Wheel Fastening with Quick-Releases and

Thru Axles” of your general STEVENS user manual and the operating instructions

on the enclosed CD-ROM.

2. Are the connections of the rechargeable battery, the drive HMI, the operating unit

and the drive correctly plugged?

For more information read chapter “Operation” in the BOSCH system instructions,

chapter “Battery Pack 7000/Operation” in the FAZUA system instructions or chap-

ter “Method of use” in the SHIMANO STePS system instructions on the enclosed

CD-ROM.

3. Is your battery fully charged? Keep in mind to entirely recharge the battery after

every ride. You should not wait until the battery is empty!

For more information read chapter “Operation” in the BOSCH system instructions,

chapter “Battery Pack 7000/Operation” in the FAZUA system instructions or

chapter “Charging the battery” in the Shimano STePS system instructions on the

enclosed CD-ROM.

4. Does the drive HMI show all values? Is there any error message or warning on

the display? Check the values are correct on your drive HMI before every ride.

Do not set off on your STEVENS pedelec when the drive HMI shows a warning.

5. Are you familiar with the operating unit? By using the buttons of the operating

unit you can increase or decrease the assistance level, activate or switch-off the

push-assistance function and switch between the indication functions.

For more information read chapters “Operation” and “Error Code Indication” in

the BOSCH system instructions, chapter “Remote/Operation” in the FAZUA system

instructions or chapter “Switching between cycle computer operations and

modes” in the Shimano STePS system instructions on the enclosed CD-ROM.

6. Is the battery tight in its holder and the lock properly locked up? Never set off

with a loose and unlocked battery.

For more information read chapter “Assembly” in the BOSCH system instructions,

chapter “Assembly” in the FAZUA system instructions or chapter “Installing/

removing the battery” in the Shimano STePS system instructions on the enclosed

CD-ROM.

Danger:

Remove the recharge-

able battery or the

display before doing any

work on your STEVENS

pedelec (e.g. servicing,

repairs, assembly, main-

tenance, work on your

drive etc.). Activating the

drive system uninten-

tionally bears the risk

of injury!

Stevens E-Bike Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stevens E-Bike

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info