608752
22
Zoom out
Zoom in
Vorherige Seite
1/138
Nächste Seite
1. CHECKING THE MACHINE
Ensure that the accumu-
lator is not inserted in its compartment.
Before starting work please:
check that the switch lever and the safety switch
handle move freely without forcing and return au-
tomatically and rapidly back to their neutral po-
sition;
check that the cooling air vents are not ob-
structed;
check that the power cable and extension lead
are not damaged;
check that handgrips and protection devices are
clean and dry, correctly mounted and well fas-
tened to the machine;
check that the machine is not showing signs of
wear or damage due to knocks or other causes,
and carry out the necessary repairs.
check that the accumulator is in good working con-
dition and there are no signs of damage. Never
use the machine with a damaged or worn accu-
mulator;
charge the accumulator according to the in-
structions in the “Charging the accumulator”
chapter.
2. CHARGING THE ACCUMULATOR (Fig. 1)
If the accumulator (1) is already in its seat on the tool
(2), press both side buttons on the accumulator (1)
and pull it outwards to extract it.
Check that the socket mains
voltage is the same as that indicated on the battery
charger plate.
IMPORTANT
WARNING!
To recharge the accumulator, proceed as follows:
connect the battery charger (4) to a mains pow-
er socket;
connect the battery charger (4) plug (3) to the ac-
cumulator socket (1).
The red indicator light (5) will come on indicating that
accumulator charging has begun.
If the indicator light does not
come on, check that power is supplied to the
mains socket.
When the accumulator is completely charged, the
green indicator light (5a) flashes and recharging will
stop automatically.
When the accumulator is completely charged, the
green indicator light (5a) flashes and recharging will
stop automatically.
It takes about 3-5 hours to complete the recharge
process, according to the starting status of the ac-
cumulator.
It is not necessary to check
the recharge time. The accumulator will heat up dur-
ing the recharge process. This is normal and is not
due to defects or faults.
When recharging has been completed,
position the charged accumulator (1) in its seat
on the tool, pushing inwards until both side but-
tons click into place; the accumulator will only fit
inside the tool when inserted correctly
disconnect the battery charger (4) from the
mains socket when not in use.
NOTE
NOTE
Charge the accumulator before using the tool fol-
lowing the instructions in the “Charging the accu-
mulator” chapter.
Unpacking and complet-
ing the assembly should be done on a flat and
stable surface, with enough space for moving
the machine and its packaging, always making
use of suitable equipment.
Disposal of the packaging should be done in ac-
cordance with the local regulations in force.
WARNING!
Mount the components
very carefully so as not to impair the safety
and efficiency of the machine. If in doubt, con-
tact your dealer.
Remove the machine from its packaging, taking
care to gather all the machine contents and docu-
ments.
For safety reasons during transportation, the lithium
ion accumulator is completely flat when delivered
and packed separately.
Ensure that the accumulator is not inserted in its
compartment.
WARNING!
6
MACHINE ASSEMBLY / PREPARING TO WORK
EN
4. MACHINE ASSEMBLY
5. PREPARING TO WORK
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Stiga SHT 5224 A wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Stiga SHT 5224 A

Stiga SHT 5224 A Bedienungsanleitung - Dänisch, Schwedisch, Norwegisch, Finnisch - 128 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info