Bedienungsanleitung Stiga SHT 5224 A (Seite 23 von 138) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

608752

Zoom out

Zoom in

Vorherige Seite

1/138

Nächste Seite

ual risk, which cannot be excluded. From

the kind and construction of the tool the

foreseeable potential endangerments can

be:

– Contact with the unprotected cutting

teeth.

– Involve fingers or hands into the moving

cutting blade.

– Unexpected, sudden movement of the

cutting blade.

– Thrown away of chips, it may damage

your eyes.

– Damage of the hearing, if no protection

of the ears is carried.

4) Keep in mind that the operator or user is

responsible for accidents or hazards oc-

curring to other people or their property.

5) Always wear suitable clothing when using

the machine. Your dealer can provide you

with all the information on the most suit-

able accident-prevention devices to guar-

antee your safety.

6) Mow only in daylight or good artificial

light.

For your safety and that

of others:

1) Do not use the machine without having

read the instructions carefully. Become

acquainted with the controls and the pro-

per use of the machine. Learn how to stop

the motor quickly.

2) Only use the machine for its intended use,

that is “the cutting and trimming of hedges,

consisting in plants with small sized

branches”. Any other use may be danger-

ous and severly damage the machine. Ex-

amples of improper use may include, but

are not limited to:

– general grass cutting and in particular,

near kerbs;

– chopping material for composts;

– pruning;

– using the machine for cutting non-plant

material;

– use of the machine by more than one

person.

3) Residual risks: even all the safety rule are

obeyed, there still can be a certain resid-

WARNING!

HIGH = Greater performance and an increase in

energy consumption, reducing the ac-

cumulator’s power reserve;

LOW = Lower performance and a reduction in en-

ergy consumption, increasing the accu-

mulator’s power reserve approximately

twice as much.

To go from one level to another, press the switch (4)

located on the back of the rear handgrip.

STOPPING THE MOTOR (Fig. 2)

To stop the motor:

– Release the handle of the safety switch (2) and

the switch (3).

– Remove the accumulator (1) from its compart-

ment.

When the motor is switched

off, a few sparks may be seen near the ventilation

slots; this is perfectly normal and does not damage

the tool in any manner.

NOTE

STARTING THE MOTOR (Fig. 2)

Before starting the motor:

– Remove the blade protection devices.

– Make sure the blade is not touching the ground

or any other object.

– Make sure that the front handgrip is locked in

the centre position.

– Insert the accumulator (1) inside its compart-

ment.

To start the motor:

1. Hold the machine firmly with both hands.

2. Rotate the handle of the safety switch (2 – located

in the front handgrip) and press the switch (3).

Both switches must be en-

abled in order to switch the motor on and keep it run-

ning. The motor will stop if either switch is released.

USING THE ECONOMISER (Fig. 2)

This machine is equipped with an economiser

system that regulates output power on 2 levels:

NOTE

HOW TO START - STOP THE MOTOR /USING THE MACHINE

6. HOW TO START - STOP THE MOTOR

7. USING THE MACHINE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stiga SHT 5224 A Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stiga SHT 5224 A

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info