Bedienungsanleitung Stiga SVP 40 B (Seite 26 von 96) (Alle Sprachen)

608756

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

SAFETY REGULATIONS

O BE OBSERVED SCRUPULOUSLY

MPORTANT – READ CAREFULLY BEFORE USING

THE MACHINE. KEEP FOR FUTURE REFERENCE

1) Read the instructions carefully. Become familiar with the controls

nd the proper use of the machine. Learn how to stop the engine

quickly.

) Only use the machine for the purpose for which it was designed,

namely airing and scarifying the ground.Any other usage may be haz-

rdous and harm persons and/or damage things. Examples of im-

proper use may include, but are not limited to:

– transporting persons, children or animals on the machine;

– letting oneself be transported by the machine;

–

using the machine to tow or push loads;

– use of the machine by more than one person;

–

lowering and operating the rotor on firm surfaces or with gravel or

stones.

1) Never allow children or people unfamiliar with these instructions to

use the machine. Local laws can restrict the minimum age of the op-

erator.

2) Never use the machine:

– when people, especially children or pets are nearby;

– if the operator has taken medicine or substances that may impair his

ability to react and be attentive.

3) Bear in mind that the operator or user is responsible for accidents

or unexpected events occurring to other people or their property.

4) While working, always wear protection against noise and safety

glasses.

5) While working, always wear sturdy footwear and long trousers. Do

not operate the machine when barefoot or wearing open sandals.

6) Thoroughly inspect the entire work area and remove anything that

could be thrown by the machine or damage the cutting unit or engine

(stones, branches, iron wire, bones, etc.).

7) WARNING: DANGER! Petrol is highly flammable.

– store the petrol in suitable containers;

– add petrol using a funnel, only outdoors; never smoke while doing

this and whenever petrol is handled;

– add petrol before starting the engine;never add petrol or remove the

petrol tank cap while the engine is running or when it is hot;

– if you have spilt some petrol, do not attempt to start the engine but

move the machine away from the area of spillage to avoid creating

any source of ignition until the petrol has evaporated and petrol

vapours have dissipated;

– always put the tank and petrol container caps back on and tighten

well;

8) Replace faulty silencers

9) Before use, always inspect generally and in particular to see that the

blade, screws and cutting unit are not worn or damaged. Replace

damaged or worn blades and screws to preserve balance.

1) Do not operate the engine in a confined space where dangerous

carbon monoxide fumes can develop.

2) Work only in daylight or good artificial light.

3) Avoid working on wet grass or take all precautions needed to avoid

slipping.

4) Make sure you have a steady foothold on slopes.

5) Non Never run with the machine, always walk..

6) Always work transversally on slopes and never up and down.

7) Be extremely carefully when changing directions on slopes.

8) Do not work on land that slopes more than 20°.

9) Be extremely careful when you pull the machine toward you.

10) Stop the rotor if the machine must be inclined, when moving over

surfaces other than grass and when the machine is transported from

or to the work area.

11) Never operate the machine with damaged guards, or without

C) DURING USE

B) PRELIMINARY OPERATIONS

A) TRAINING

afety protection like the grass-catcher or stone-guards.

12) Do not change the engine settings or overspeed the engine.

3) Disengage the tine rotor before starting the engine.

4) Start up the engine carefully according to the instructions, keep-

ing feet away from the rotary tools.

5) Do not incline the machine when starting the engine, unless nec-

essary for start up.In this event, do not incline it more than is absolutely

ecessary and only lift the part that is far from the operator.

16) Do not start the engine while standing in front of the discharge out-

let.

7) Never place your hands and feet near or under rotating parts. Al-

ways stay at a certain distance from the discharge outlet.

8) Do not lift or transport the machine when the engine is running.

19) Stop the engine and disconnect the spark plug cable:

–

before doing anything to the rotary tools;

– before checking, cleaning or working on the machine;

– after striking a foreign object. Inspect the machine for damage and

ake repairs before restarting and operating the machine;

–

if the machine begins to vibrate abnormally (Immediately look for the

cause of vibration and take it to a Specialised Centre for necessary

nspections).

20) Stop the engine::

–

whenever you leave the machine unattended;

– before refuelling;

21) Reduce the throttle setting before stopping the engine.Shut off the

etrol supply when working is done, following the instructions in the en-

gine manual.

And furthermore:

• When working, always keep a safe distance from the rotary tools,

given by the length of the handle.

1) Keep all nuts and screws tight to be sure the equipment is in safe

working condition. Routine maintenance is essential for safety and for

maintaining a high performance level.

2) Do not store the machine with petrol in the tank in an area where

petrol vapours could reach an open flame, a spark or a strong heat

source.

3) Allow the engine to cool before storing the machine in any enclo-

sure.

4) To reduce fire hazards, keep the engine, silencer, battery compart-

ment and petrol storage area free of grass, leaves, or excessive grease.

5) Check the stone-guard and grass-catcher frequently for wear or de-

terioration.

6) For safety reasons, never use the machine when it has worn or dam-

aged parts. Parts must be replaced and not repaired. Use original

spare parts. Parts that are not of the same quality can damage the

equipment and impair your safety.

7) If the petrol tank has to be emptied, this should be done outdoors

once the engine has cooled down.

And furthermore:

• Stop the engine and disconnect the spark plug cable before doing

any maintenance;

1) Whenever the machine is to be handled, lifted, transported or tilted

you must:

– stop the engine;

– wear sturdy work gloves;

– grasp the machine at the points that offer a safe grip, taking account

of the weight and its distribution.

use an appropriate number of people for the weight of the machine and

the characteristics of the vehicle or the place where it must be placed

or collected.

2) During transport, fasten the machine securely with cables or chains.

E) TRANSPORTATION AND HANDLING

D) MAINTENANCE AND STORAGE

Starten bei Inbetriebnahme nach längerer Standdauer Eingereicht am 23-3-2019 10:26
Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.

Neu registrieren

Registrieren auf E - Mails für Stiga SVP 40 B wenn:

neue Frage gestellt werden
neue Handbücher vorhanden sind

Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.

Stiga SVP 40 B Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.